Silvent Air Knife - 366
Silvent - Air Knife - 366
SILVENT 366: a quiet and efficient air knife with six angled SILVENT 961 flat nozzles and a specially designed aluminum manifold.
The small mounting dimensions make these air knives suitable for machine designs where space is limited. Generates a broad but flat air cone and combines the advantages of low noise level, low air consumption and high blowing efficiency. SILVENT 366 creates an air cone spread of 225 mm (8.86″) at a distance of 150 mm (6″). Blowing force = 19.8 N (4.4 lbs). Fully meets OSHA safety regulations and the demands the EU Machine Directive makes on the amount of airborne noise generated by machines.
| SI units | US units | |
|---|---|---|
| Blowing force | 19.8 N | 4.4 lbs |
| Air consumption | 117 Nm³/h | 68.9 scfm |
| Sound level | 89.5 dB(A) | |
| Blowing pattern | Flat | |
| Connection | G 3/8″ | 3/8″-18 NPT |
| Connection type | Female | |
| Dimensions | 172x23x38.5 mm | 6.77×0.90×1.52 inch |
| Material | Zinc | |
| Weight | 0.286 kg | 0.631 lbs |
| Max temp | 70 °C | 158 °F |
| Max operating pressure | 1.0 MPa | 143.0 psi |
Benefits |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Replace open pipe | 10 mm | 3/8 inch | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Noise reduction [dB(A)] | 22 dB(A) | 78 % | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Air/cost savings [Nm³/h] | 68 Nm³/h | 37 scfm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Meet the EU Machine directives | Yes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
To contact Spray Nozzle Engineering about Silvent Air Knife - 366 use Get a quote.
The small mounting dimensions make these air knives suitable for machine designs where space is limited. Generates a broad but flat air cone and combines the advantages of low noise level, low air consumption and high blowing efficiency. SILVENT 366 creates an air cone spread of 225 mm (8.86″) at a distance of 150 mm (6″). Blowing force = 19.8 N (4.4 lbs). Fully meets OSHA safety regulations and the demands the EU Machine Directive makes on the amount of airborne noise generated by machines.
| SI units | US units | |
|---|---|---|
| Blowing force | 19.8 N | 4.4 lbs |
| Air consumption | 117 Nm³/h | 68.9 scfm |
| Sound level | 89.5 dB(A) | |
| Blowing pattern | Flat | |
| Connection | G 3/8″ | 3/8″-18 NPT |
| Connection type | Female | |
| Dimensions | 172x23x38.5 mm | 6.77×0.90×1.52 inch |
| Material | Zinc | |
| Weight | 0.286 kg | 0.631 lbs |
| Max temp | 70 °C | 158 °F |
| Max operating pressure | 1.0 MPa | 143.0 psi |
Benefits |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Replace open pipe | 10 mm | 3/8 inch | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Noise reduction [dB(A)] | 22 dB(A) | 78 % | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Air/cost savings [Nm³/h] | 68 Nm³/h | 37 scfm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Meet the EU Machine directives | Yes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
To contact Spray Nozzle Engineering about Silvent Air Knife - 366 use Get a quote.
The Silvent 366 is an air knife that directs airflow for blowing applications. Six angled SILVENT 961 flat nozzles create a broad, flat air cone across a wide target area. Machine designers working with limited mounting space can use its small mounting dimensions when planning machine layouts with little room for equipment around the air knife.
- Specially designed aluminium manifold
- Blowing force: 19.8 N
- Air consumption: 117 Nm3/h
- Sound level: 89.5 dB(A)
- Meets OSHA safety regulations and EU Machine Directive airborne-noise requirements
Source: listing by Spray Nozzle Engineering on IndustrySearch · Updated 4 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Spray Nozzle Engineering on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Safety Air Gun | Pro One
Air Knife - 366
Air Knife - 396
Air Knife - 306 L
Air Knife - 310 Z+
Air Nozzle - 801
Safety Air Guns | BG-007
High Force Safety Air Guns | 2973
High Force Safety Air Guns | 2804-R
High Force Safety Air Guns | 2055-S
Mining Hose Reels – Pit Bull
Turf Care Hose Reels – Reel Tuff
Fire Protection Hose Reels – Fire Dog
Spray Nozzle | Combo
Super Air Knife
48" Compressed Air Super Air Knife to Blow, Dry & Cool
54" Super Air Knife to Blowoff, Dry or Cool Wide Surfaces
Type 316 Stainless Steel Super Air Knife
PVDF Super Air Knife
Long Super Ion Air Knife
Air Knives Assure Safe Operations | CE Compliant
Deluxe Super Ion Air Knife Kits
Longer Super Air Knife Covers Wide Spans
Anti-Static Super Ion Air Knife
Linear Air Knives
Air Knives
Air Knives | Nex Flow
Air Knives | Typhoon with EP-Sh-N anti-static bar
Air Knives | Force
Blower Air Knives | Aluminium Extrusion
Blower Air Knives | Aluminium Extrusion Premium
Air Knife - 396
Air Knife - 306 L
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales