STEINERT Suspension Magnetic Separators ...
STEINERT - Suspension Magnetic Separators | Boomerang
STEINERT Boomerang – for extreme requirements in the separation of tramp iron
Ideally adapted to the material flow: the most powerful manual overhead suspension magnet with a net weight of 43 tons
We have conceived our STEINERT Boomerang manual overhead suspension magnet for separating disruptive tramp iron and coarse parts like rods and excavator teeth from ores or coal with large mass flows. Such disruptive parts can be sometimes very dense or have sharp edges and must be removed as they can cause major damage to conveyor belts, grinding machines or other procedural system components in the course of further processing.
The STEINERT Boomerang is therefore hung in the discharge of a conveyor belt pulley. There its characteristic shape permits it to ideally follow the material flow's discharge parabola. This optimises the sortable material's length of stay in the magnetic field and maximises the extraction of magnetic parts.
The oil-cooled electromagnet in our effective manual overhead suspension magnet generates extremely strong and extensive magnetic fields, which are designed especially for wide conveyor belts at high transport speeds. A material throughput of 8,500 t/h in coal handling can for instance be achieved on wide conveyor belts at high transport speeds and with large layer thicknesses.
The magnetic separator weighs 43 tons and has a power consumption of 64 kW. We offer you special mobile cranes to retract the magnetic separator from the material flow for the removal cycle. Here the magnet separator is swung briefly away from the separation area and switched off to allow the extracted iron to fall into a separate discharge chute. The magnet is subsequently returned to its starting position and the sorting cycle can begin again.
- Tramp iron and separation of coarse parts in mining
- Housing shape ideally adapted to the material flow
- Removal cycle required
- For wide conveyor belts with high conveyor speed and layer thicknesses at extreme throughput
To contact STEINERT Australia about STEINERT Suspension Magnetic Separators | Boomerang use Get a quote.
Ideally adapted to the material flow: the most powerful manual overhead suspension magnet with a net weight of 43 tons
We have conceived our STEINERT Boomerang manual overhead suspension magnet for separating disruptive tramp iron and coarse parts like rods and excavator teeth from ores or coal with large mass flows. Such disruptive parts can be sometimes very dense or have sharp edges and must be removed as they can cause major damage to conveyor belts, grinding machines or other procedural system components in the course of further processing.
The STEINERT Boomerang is therefore hung in the discharge of a conveyor belt pulley. There its characteristic shape permits it to ideally follow the material flow's discharge parabola. This optimises the sortable material's length of stay in the magnetic field and maximises the extraction of magnetic parts.
The oil-cooled electromagnet in our effective manual overhead suspension magnet generates extremely strong and extensive magnetic fields, which are designed especially for wide conveyor belts at high transport speeds. A material throughput of 8,500 t/h in coal handling can for instance be achieved on wide conveyor belts at high transport speeds and with large layer thicknesses.
The magnetic separator weighs 43 tons and has a power consumption of 64 kW. We offer you special mobile cranes to retract the magnetic separator from the material flow for the removal cycle. Here the magnet separator is swung briefly away from the separation area and switched off to allow the extracted iron to fall into a separate discharge chute. The magnet is subsequently returned to its starting position and the sorting cycle can begin again.
- Tramp iron and separation of coarse parts in mining
- Housing shape ideally adapted to the material flow
- Removal cycle required
- For wide conveyor belts with high conveyor speed and layer thicknesses at extreme throughput
To contact STEINERT Australia about STEINERT Suspension Magnetic Separators | Boomerang use Get a quote.
The STEINERT Boomerang is a manual overhead suspension magnet that separates tramp iron and coarse parts from conveyed material. Its housing follows the material’s discharge parabola, extending the time sortable material spends in the magnetic field and maximising magnetic-part extraction. Mining operations handling ores or coal use it to remove rods and excavator teeth before they reach downstream equipment.
- Oil-cooled electromagnet generates strong, extensive magnetic fields
- Coal handling: 8,500 t/h on wide, high-speed belts with thick material layers
- Net weight: 43 tons
- Power consumption: 64 kW
- Special mobile cranes are offered to retract the magnet for iron removal
Source: listing by STEINERT Australia on IndustrySearch
· Updated 4 Nov 2026
Supplier document: STE-Boomerang-MagDrive Brochure (PDF)
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by STEINERT Australia on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Suspension Magnetic Separators | Boomerang
Suspension Magnetic Separators | AME
Wet Drum Magnetic Separators | HGF
Wet Drum Magnetic Separators | WDS
Wet Drum Magnetic Separators | NTS
Eddy Current Magnetic Separators | CanMaster
Eddy Current Magnetic Separators | EddyC
Eddy Current Magnetic Separators | EddyC MOVE
Magnetic Drum Separators
Suspension Magnetic Separators | UME
-280x280-state_7.jpg)
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales