Sterling Pumps Submersible Borehole Pumps: ...

Sterling Pumps - Submersible Borehole Pumps: 6” 8” 10” I W Series

Supplier: Sterling Pumps

Submersible Borehole Pumps: 6” 8” 10” I W Series

The Sterling Pumps W series Stainless Steel Submersible Pumps have been designed for pumping water for a diverse range of pumping duties for water supply, irrigation and agricultural, mining, industrial and municipal and fire fighting applications.

12 Recent Views In Stock

Construction is from stainless steel. The W series feature both radial and mixed flow impellers, stainless steel bowls, motor bracket, discharge head and all have integral check valves.

Features:

All stainless steel construction, 304 SS
Option (N) for full 316SS construction
Radial and Mixed flow impeller design
Bearing are water lubricated and are shaped to enable sand particle to pass through with the pumped water
Stop Ring to assist to minimise wear from start up for any up thrust.
Inlet strainer
Check Valve to prevent back flow and minimise water hammer
High efficiency
Pump inlet confirms to NEMA standard for submersible motors
BSP outlet thread as standard, NPT available
Water temperature 0°C up to 45°C
Solids handling Maximum sand/solids in water; 50 g/m³
Pump/motor Performance Based on 2,900 rpm, 2 pole 50 Hz
Max. starts per hour 20 at regular intervals
Direction of rotation Clockwise as seen from the pump coupling side
W series pumps can also be manufactured as a Line Shaft driven pump

To contact Sterling Pumps about Sterling Pumps Submersible Borehole Pumps: 6” 8” 10” I W Series use Get a quote.

Construction is from stainless steel. The W series feature both radial and mixed flow impellers, stainless steel bowls, motor bracket, discharge head and all have integral check valves.

Features:

All stainless steel construction, 304 SS
Option (N) for full 316SS construction
Radial and Mixed flow impeller design
Bearing are water lubricated and are shaped to enable sand particle to pass through with the pumped water
Stop Ring to assist to minimise wear from start up for any up thrust.
Inlet strainer
Check Valve to prevent back flow and minimise water hammer
High efficiency
Pump inlet confirms to NEMA standard for submersible motors
BSP outlet thread as standard, NPT available
Water temperature 0°C up to 45°C
Solids handling Maximum sand/solids in water; 50 g/m³
Pump/motor Performance Based on 2,900 rpm, 2 pole 50 Hz
Max. starts per hour 20 at regular intervals
Direction of rotation Clockwise as seen from the pump coupling side
W series pumps can also be manufactured as a Line Shaft driven pump