Franklin Fuelling Systems Submersible ...

Franklin Fuelling Systems - Submersible Borehole Pump | AdBlueⓇ DEF-PMA150B

Supplier: PETRO Industrial

Submersible Borehole Pump | AdBlueⓇ DEF-PMA150B

AdBlueⓇ PUMP Submersible FE PETRO DEF-PMA150B 1.5 hp 200-250V single phase 50hz up to 250lpm.

In Stock

AdBlue? PUMP Submersible FE PETRO DEF-PMA150B 1.5 hp 200-250V single phase 50hz up to 250lpm.

Supplied with:

EZFIT CONNECT KIT – Code: 403457901

KIT, 2"CHECK VALVE – Code: 403465901

FE Petro™ brand diesel exhaust fluid pump motor assemblies feature a Stainless Steel close-coupled design powered by a field-proven Franklin Electric motor.

NOTE - we recommend the use of a Single Phase Controller with any pump purchased and used.

HIGHLIGHTS

Stainless steel, encapsulated motor ensures longevity and impermeability to DEF seepage.
Heavy-duty shaft provides superior alignment and resistance to stress.
Double mechanical shaft seals protect the oil-filled bearing chamber from DEF seepage, assuring minimal wear and proper bearing lubrication.
Stainless steel hydraulics provide superior performance and efficiency.
Plug-in type EPDM jacket power cable provides ease of service and DEF compatibility.
Multiple models available to meet global requirements of voltage and frequency.

INSTALLATION

All models are suitable for vertical installation where the pump motor is suspended off the bottom of the tank by the discharge piping.
Bypass relief valve with cracking pressure of 30-40 psi (2.1-2.8 bar) and 4 gpm (15 lpm) minimum flow required at the discharge of all models.
Non-return check valve with maximum cracking pressure of 3 psi (0.2 bar) required between product piping and bypass relief valve of all models.

SPECIFICATIONS

Materials: Stainless steel construction including impellers/diffusers, inlet/outlet , and outer shell
Pump type: All models are 5.1" (130 mm) outside diameter centrifugal type pump
Power cable: 32.8' (10 m) EPDM jacketed plug-in power cable
60 Hz pump motor: Two-stage pump with 2" NPT female outlet
50 Hz pump motor: Three-stage pump with 2" BSPT female outlet
Motor rating: Continuous operation with motor cooling provided by product flow and protected from dry running
Liquid compatibility: All models are intended for use with Diesel Exhaust Fluid (DEF). DEF is a non-flammable, non-combustible liquid that has a specific gravity of 1.09 at 68°F, and is made per ISO 22241-1 specifications with 32.5% urea and distilled or deionized water. As defined by ISO 22241-1, DEF is the same as AUS 32 (aqueous urea solution).

To contact PETRO Industrial about Franklin Fuelling Systems Submersible Borehole Pump | AdBlueⓇ DEF-PMA150B use Get a quote.

AdBlue? PUMP Submersible FE PETRO DEF-PMA150B 1.5 hp 200-250V single phase 50hz up to 250lpm.

Supplied with:

EZFIT CONNECT KIT – Code: 403457901

KIT, 2"CHECK VALVE – Code: 403465901

FE Petro™ brand diesel exhaust fluid pump motor assemblies feature a Stainless Steel close-coupled design powered by a field-proven Franklin Electric motor.

NOTE - we recommend the use of a Single Phase Controller with any pump purchased and used.

HIGHLIGHTS

Stainless steel, encapsulated motor ensures longevity and impermeability to DEF seepage.
Heavy-duty shaft provides superior alignment and resistance to stress.
Double mechanical shaft seals protect the oil-filled bearing chamber from DEF seepage, assuring minimal wear and proper bearing lubrication.
Stainless steel hydraulics provide superior performance and efficiency.
Plug-in type EPDM jacket power cable provides ease of service and DEF compatibility.
Multiple models available to meet global requirements of voltage and frequency.

INSTALLATION

All models are suitable for vertical installation where the pump motor is suspended off the bottom of the tank by the discharge piping.
Bypass relief valve with cracking pressure of 30-40 psi (2.1-2.8 bar) and 4 gpm (15 lpm) minimum flow required at the discharge of all models.
Non-return check valve with maximum cracking pressure of 3 psi (0.2 bar) required between product piping and bypass relief valve of all models.

SPECIFICATIONS

Materials: Stainless steel construction including impellers/diffusers, inlet/outlet , and outer shell
Pump type: All models are 5.1" (130 mm) outside diameter centrifugal type pump
Power cable: 32.8' (10 m) EPDM jacketed plug-in power cable
60 Hz pump motor: Two-stage pump with 2" NPT female outlet
50 Hz pump motor: Three-stage pump with 2" BSPT female outlet
Motor rating: Continuous operation with motor cooling provided by product flow and protected from dry running
Liquid compatibility: All models are intended for use with Diesel Exhaust Fluid (DEF). DEF is a non-flammable, non-combustible liquid that has a specific gravity of 1.09 at 68°F, and is made per ISO 22241-1 specifications with 32.5% urea and distilled or deionized water. As defined by ISO 22241-1, DEF is the same as AUS 32 (aqueous urea solution).

Read less...

To contact PETRO Industrial about Franklin Fuelling Systems Submersible Borehole Pump | AdBlueⓇ DEF-PMA150B use Get a quote.

Data Sheet(0.14MB)

AI Overview BETA

The Franklin Fuelling Systems FE Petro DEF-PMA150B set is a submersible AdBlue pump assembly that moves fluid at up to 250 lpm. The encapsulated stainless-steel motor prevents DEF from seeping into its internal motor assembly. For vertical tank installations, the pump hangs from the discharge piping, keeping its motor above the tank bottom during operation.

Supplied with an EZFIT connect kit and 2-inch check valve
1.5 hp motor; 200–250 V single-phase supply
50 Hz models use a three-stage pump
Continuous operation; product flow cools the motor and protects against dry running
Single-phase controller recommended for use with each pump

Source: listing by PETRO Industrial on IndustrySearch · Updated 31 Oct 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let PETRO Industrial provide you with a quote