Teco Single Phase Electric Motor | Monarch ...

Teco - Single Phase Electric Motor | Monarch

Supplier: Davis & Spence

Single Phase Electric Motor | Monarch

Wide range of low voltage options ranging 0.18kW to 3kW.

15 Recent Views In Stock

Features of this product

Designed to operate in ambient conditions of -15°C to +40°C as standard
Designed for operation at an altitude up to 1000 metres above sea level.
Rotors are dynamically balanced with a half key to Class N, according to AS1359.50
Designed for 230-250 Volt single phase 50 Hz. Motors 1.5kW and larger are dual voltage 240/480 Volts.
High corrosion protected surface with two finish coats of gloss acrylic resin in finish colour Teal T63 to AS2700. All castings are mechanically cleaned and degreased with aluminium components being primed externally.
High grade insulated cold rolled electro magnetic steel laminations. Vacuum impregnated Class F insulation with design temperature rise of class B for long motor life and thermal reserve for abnormal conditions.
Motors have a ball/ball bearing combination and are fitted with greased for life sealed bearings. Shaft Oil seals are provided at each end on all motors to exclude the ingress of dust and water.
Manual Reset Thermal Overload device are fitted to motors up to an including 1.1 kW to protect against overload conditions.

Specifications of this product

Frame sizes: 63 to 100L
Performance requirements: meets AS1359
Protection rating: IP55
Duty rating: maximum continuously rated type S1
Mounting: available Foot, Foot and flange (C and D types), Flange (C and D types)
Standards: designed and manufactured to IEC34, IEC72, AS1359 with Quality Assurance to ISO9001. Motors are CE marked.

To contact Davis & Spence about Teco Single Phase Electric Motor | Monarch use Get a quote.

Features of this product

Designed to operate in ambient conditions of -15°C to +40°C as standard
Designed for operation at an altitude up to 1000 metres above sea level.
Rotors are dynamically balanced with a half key to Class N, according to AS1359.50
Designed for 230-250 Volt single phase 50 Hz. Motors 1.5kW and larger are dual voltage 240/480 Volts.
High corrosion protected surface with two finish coats of gloss acrylic resin in finish colour Teal T63 to AS2700. All castings are mechanically cleaned and degreased with aluminium components being primed externally.
High grade insulated cold rolled electro magnetic steel laminations. Vacuum impregnated Class F insulation with design temperature rise of class B for long motor life and thermal reserve for abnormal conditions.
Motors have a ball/ball bearing combination and are fitted with greased for life sealed bearings. Shaft Oil seals are provided at each end on all motors to exclude the ingress of dust and water.
Manual Reset Thermal Overload device are fitted to motors up to an including 1.1 kW to protect against overload conditions.

Specifications of this product

Frame sizes: 63 to 100L
Performance requirements: meets AS1359
Protection rating: IP55
Duty rating: maximum continuously rated type S1
Mounting: available Foot, Foot and flange (C and D types), Flange (C and D types)
Standards: designed and manufactured to IEC34, IEC72, AS1359 with Quality Assurance to ISO9001. Motors are CE marked.

Read less...

To contact Davis & Spence about Teco Single Phase Electric Motor | Monarch use Get a quote.

AI Overview BETA

Teco Monarch is a single-phase electric motor range, with low-voltage options from 0.18 kW to 3 kW. Motors rated up to and including 1.1 kW have a manual-reset thermal overload device that protects against overload conditions. Foot, foot-and-flange, and flange mounting are available, with C and D types offered for the latter two, giving buyers several fitting arrangements.