Testo Gas Analyser & Gas Detector | Kit ...

Testo - Gas Analyser & Gas Detector | Kit 320

Gas Analyser & Gas Detector | Kit 320

The Testo 320 low cost gas anlayser kit, offering comprehensive combustion system analysis, is designed for the job site and for the contractor who expects more.

66 Recent Views In Stock

Use the Testo combustion analyzer for basic testing and tuning of all types of boilers, heaters or furnaces and also to set up and commission more complex multi-stage or modulating heating systems, for accurate combustion efficiency analysis.

Innovative features like the flue gas matrix will graphically display the combustion characteristics, which is an easy way to show if the heating system is running efficiently. Additionally the Testo 320 makes the job easier by displaying from 2 to 8 user-defined parameters simultaneously. The Testo 320 eliminates the guess work and provides accurate combustion system analysis.

Features

Flue gas analysis on heating systems: the testo 320 basic flue gas analyzer is equipped with two sensors – an O₂ and a CO sensor (without H₂ compensation). In the case of CO measurement, the measuring range goes up to 4,000 ppm. You need a flue gas probe for the flue gas measurement (can be ordered separately). A temperature probe is integrated into the probe. All relevant flue gas measurement parameters can therefore be calculated: CO₂ value, efficiency and flue gas loss. The flue gas analyzer is also suitable for flue draught measurements or pressure measurements
Changing probes is easy: The probes can be changed by the user. This means you can order other probes specifically required for your flue gas analysis (e.g. multi-hole probe, dual wall clearance probe, flexible flue gas probe)
Single-hose connection: in just one hand movement, all channels for the flue gas measurement can be securely connected via the probe coupling (gas paths, draught, temperature probe integrated in the flue gas probe, which can be ordered separately)
Long service life thanks to the long-life Li-ion rechargeable battery
Built-in magnets enable the flue gas analyzer to be attached to the burner/boiler quickly and easily
Integrated condensate trap: easy to empty

Technical Data

Storage Temperature	-20 to + 50°C
Operating temperature	-50 to + 45 °C
Power Supply	Battery: 1500 mAh, mains unit 5V/1A
Battery life	250 h (less with use Bluetooth & Backlit)
Dimensions	201 x 83 x 44 mm

To contact HK Calibration Technologies about Testo Gas Analyser & Gas Detector | Kit 320 use Get a quote.

Features

Flue gas analysis on heating systems: the testo 320 basic flue gas analyzer is equipped with two sensors – an O₂ and a CO sensor (without H₂ compensation). In the case of CO measurement, the measuring range goes up to 4,000 ppm. You need a flue gas probe for the flue gas measurement (can be ordered separately). A temperature probe is integrated into the probe. All relevant flue gas measurement parameters can therefore be calculated: CO₂ value, efficiency and flue gas loss. The flue gas analyzer is also suitable for flue draught measurements or pressure measurements
Changing probes is easy: The probes can be changed by the user. This means you can order other probes specifically required for your flue gas analysis (e.g. multi-hole probe, dual wall clearance probe, flexible flue gas probe)
Single-hose connection: in just one hand movement, all channels for the flue gas measurement can be securely connected via the probe coupling (gas paths, draught, temperature probe integrated in the flue gas probe, which can be ordered separately)
Long service life thanks to the long-life Li-ion rechargeable battery
Built-in magnets enable the flue gas analyzer to be attached to the burner/boiler quickly and easily
Integrated condensate trap: easy to empty

Technical Data

Storage Temperature	-20 to + 50°C
Operating temperature	-50 to + 45 °C
Power Supply	Battery: 1500 mAh, mains unit 5V/1A
Battery life	250 h (less with use Bluetooth & Backlit)
Dimensions	201 x 83 x 44 mm

Read less...

To contact HK Calibration Technologies about Testo Gas Analyser & Gas Detector | Kit 320 use Get a quote.

AI Overview BETA

The Testo 320 is a gas analyser kit for combustion-system analysis. Its flue gas matrix graphs combustion characteristics, giving users a visual way to assess whether a system is running efficiently. Contractors can use it to commission multi-stage or modulating heating systems and carry out basic tests on all types of boilers, heaters and furnaces.

O₂ and CO sensors; CO up to 4,000 ppm, without H₂ compensation
Displays 2 to 8 user-defined parameters simultaneously
Flue gas probe required for measurement; ordered separately
Battery life: 250 h, less with Bluetooth and backlight use
Dimensions: 201 x 83 x 44 mm

Source: listing by HK Calibration Technologies on IndustrySearch · Updated 4 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let HK Calibration Technologies provide you with a quote

Supplier

Supplier: HK Calibration Technologies

Distribution: Australia & New Zealand

Location: North Parramatta, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. HK Calibration Technologies are also proudly displaying these credentials:

Employees:

6-20

Certifications:

ISO 9001-2015, ISO 17025-2005

Distribution:

Australia & New Zealand

Location:

North Parramatta , NSW

Joined:

Jun 2018

Level:

Standard Storefront