Thunder Laser Laser Engraving Machine | ...

Thunder Laser - Laser Engraving Machine | Mini 60

Supplier: Thunder Laser Australia

Laser Engraving Machine | Mini 60

1/4

Our desktop Mini 60 40 watt laser engraver is a suitable tool for basic makers to start. Cutting, marking and engraving is just the beginning. Combine to create a huge array of designs and products.

39 Recent Views In Stock

Standard Features

Stepper Motors
- 600mm/s speed for engraving photo, super smooth vector cutting quality.
Honey Comb Table
- Reduces underside reflections.
Pass-Through Door
- Easy to cut a super long material.
Air Adjustment
- Control air volume.
Tempered Glass
- co2 laser can’t cut through Tempered glass, protect your machine security.
LCD Panel
- Set speed, power, and more directly from the LCD panel.
Connection Ways
- High-speed Ethernet line or the USB cable line.
Laser Software
- RDWorksV8 laser software.
Calculate Working Time
- Working time preview.
3D Engrave
- Engrave high quality 3D photos directly.
5X Open Cover Protection
- Laser will stop working if you open the front cover.
Emergency Stop
- Turn off the machine immediately when there is an accident.
Heat Alarm Detector
- The heat detector customized by Thunder Laser has the accurate judgment of the abnormal temperature.
Alarm Lamp
- Show the work state and tell when the job is done, more safe for you.
Water Protection
- Laser will stop working if the water cooling system is not working
Smart Board
- Control the exhaust fan,air assist, and alarm lamp automatically, energy saving
Breaker
- There is an internal circuit breaker to protect the instrument from overload.
Water Chiller
- keep the temperature to ensure the stability of laser working.
Air Assist
- Blowing air to prevent the material being burned
Exhaust System
- Ensure the work pieces and laser cutter machine inside be clean.

Technical Specifications

Laser System		Mini 60
Working Area		23.6“x 15.7“ (600 x 400 mm)
Max Part Size (W x L x H)	Door Closed	27.6“x 20.9“x 0.6“ (700 x 530 x 15mm)
	Pass Thru	27.6“ x 8“ x 0.6“ (700 x 8mm x 15 mm)
Table Size		27.6“x 20.9“ (700 x 530mm)
Z-Axis Height		FIXED
Dimensions(W x D x H)		1100x830x660mm
Net Weight		110kgs (240lbs)
Laser Type		40W Sealed Co2 Glass Laser Tube
Cooling		Water Cooled
Motion Control System		High-Speed Stepper Motors
Maximum Speed		600mm/S(23.6 IPS)
Speed and Power Control(engraving depth)		Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes		Optimized raster, vector, and combined mode
Resolution(DPI)		User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head)
Computer Interface		Ethernet and USB Connection
Compatible Operating Systems		Windows, Mac, and Linux (Mac and Linux with LightBurn Software)
Buffer Memory		128MB Standard
Display Panel		3.5? LCD panel showing current file, total working time, laser power, speed, etc…
Electrical Requirements		110VAC 60 Hz, single-phase, 15-25A Depending on model
Ventilation System		Integral exhaust fan. There is 1 output port, 5.7? (145 mm) in diameter in the rear of the case.
Max Work Height		6” / 15.24 mm
Max. Speed		RASTER: 23.6”/sec. (600 mm/sec) VECTOR: Varies with job
Workpiece table		Solid metal blades & Honeycomb table
Max. table load		20kg / 44lbs
Standard Head		2.0” (50.8mm)
Positioning accuracy:		0.05mm
Minimal symbol size:		1mmx1mm

To contact Thunder Laser Australia about Thunder Laser Laser Engraving Machine | Mini 60 use Get a quote.

Standard Features

Stepper Motors
- 600mm/s speed for engraving photo, super smooth vector cutting quality.
Honey Comb Table
- Reduces underside reflections.
Pass-Through Door
- Easy to cut a super long material.
Air Adjustment
- Control air volume.
Tempered Glass
- co2 laser can’t cut through Tempered glass, protect your machine security.
LCD Panel
- Set speed, power, and more directly from the LCD panel.
Connection Ways
- High-speed Ethernet line or the USB cable line.
Laser Software
- RDWorksV8 laser software.
Calculate Working Time
- Working time preview.
3D Engrave
- Engrave high quality 3D photos directly.
5X Open Cover Protection
- Laser will stop working if you open the front cover.
Emergency Stop
- Turn off the machine immediately when there is an accident.
Heat Alarm Detector
- The heat detector customized by Thunder Laser has the accurate judgment of the abnormal temperature.
Alarm Lamp
- Show the work state and tell when the job is done, more safe for you.
Water Protection
- Laser will stop working if the water cooling system is not working
Smart Board
- Control the exhaust fan,air assist, and alarm lamp automatically, energy saving
Breaker
- There is an internal circuit breaker to protect the instrument from overload.
Water Chiller
- keep the temperature to ensure the stability of laser working.
Air Assist
- Blowing air to prevent the material being burned
Exhaust System
- Ensure the work pieces and laser cutter machine inside be clean.

Technical Specifications

Laser System		Mini 60
Working Area		23.6“x 15.7“ (600 x 400 mm)
Max Part Size (W x L x H)	Door Closed	27.6“x 20.9“x 0.6“ (700 x 530 x 15mm)
	Pass Thru	27.6“ x 8“ x 0.6“ (700 x 8mm x 15 mm)
Table Size		27.6“x 20.9“ (700 x 530mm)
Z-Axis Height		FIXED
Dimensions(W x D x H)		1100x830x660mm
Net Weight		110kgs (240lbs)
Laser Type		40W Sealed Co2 Glass Laser Tube
Cooling		Water Cooled
Motion Control System		High-Speed Stepper Motors
Maximum Speed		600mm/S(23.6 IPS)
Speed and Power Control(engraving depth)		Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes		Optimized raster, vector, and combined mode
Resolution(DPI)		User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head)
Computer Interface		Ethernet and USB Connection
Compatible Operating Systems		Windows, Mac, and Linux (Mac and Linux with LightBurn Software)
Buffer Memory		128MB Standard
Display Panel		3.5? LCD panel showing current file, total working time, laser power, speed, etc…
Electrical Requirements		110VAC 60 Hz, single-phase, 15-25A Depending on model
Ventilation System		Integral exhaust fan. There is 1 output port, 5.7? (145 mm) in diameter in the rear of the case.
Max Work Height		6” / 15.24 mm
Max. Speed		RASTER: 23.6”/sec. (600 mm/sec) VECTOR: Varies with job
Workpiece table		Solid metal blades & Honeycomb table
Max. table load		20kg / 44lbs
Standard Head		2.0” (50.8mm)
Positioning accuracy:		0.05mm
Minimal symbol size:		1mmx1mm

Read less...

To contact Thunder Laser Australia about Thunder Laser Laser Engraving Machine | Mini 60 use Get a quote.

Brochure(3.64MB)

AI Overview BETA

Thunder Laser’s Mini 60 is a 40 W desktop CO2 laser engraver for cutting, marking and engraving materials. Its pass-through door lets you cut long material extending beyond the machine’s standard working area. Basic makers starting out can adjust speed and power from the LCD panel or computer while producing designs and products for their projects.