Thunder Laser Laser Engraving Machine | ...

Thunder Laser - Laser Engraving Machine | Odin

Supplier: Thunder Laser Australia

Laser Engraving Machine | Odin

1/5

A Thunderlaser new product in 2020, the Odin series laser machine combines small size, compact, high quality engraving and cutting at a low cost.

21 Recent Views In Stock

With 3G acceleration and 80 IPS (2000mm/sec) engraving speed, it provides a super fast laser engraving solution for industry. The RF tube allows fantastic beam signature and is air cooled, you don’t have to worry about a water chiller. The gantry payload is minimal and is super smooth.

Standard Features

High Speed Motor
- Japanese ORIENTAL motor systems on X and Y axes, with 80 IPS (2000mm/s) and 3G acceleration engraving speed.
New: 100% smoother guide Rail
- Patent guide rail developed by Thunder Laser, less resistance and low noise.
New: 1,000 DPI RF metal laser source
- With excellent quality Beam output and stable laser power, lifespan up to 10,000 hours.
New: Upper & Lower Vent
- To timely remove the heat from material surface.
Dual Air-Assist system
- Adjusting air volume for cutting and engraving separately for different requirements
New: Eightfold Open-flap protection
- Laser will stop if someone open any machine cover during working.
Newly-designed focus lens and mirror holder
- Easier to clean and replace lens and mirrors, Lenses of different FL are swappable in the same mount.
New Housing Design
- Compact, stand included, room for blower and compressor and space saved.
New Auto Focus
- No limitation for materials or working area, more accurate.
New: Drawer for collecting small working pieces
- To make it easier to collecting small working pieces and cleaning up.
Smart Board
- Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving
Visible Red Dot Pointer
- Make the laser beam “visible”.
Honey Comb Table
- Reduces underside reflections.
High Quality Power Cable
- The high-quality electrical connector has low and stable contact resistance.
Heat Alarm Detector
- Heat alarm detector.
Emergency Stop
- Turn off the machine immediately when there is an accident.
Alarm Lamp
- Show the work state and tell when the job is done, more safe for you.
Breaker
- This is a protective conductor, included to prevent shock and/or fire.
Earth Wiring
- Earthing is used to protect you from an electric shock.
3D Engrave
- Engrave high quality 3D photos directly.
3D Cutting
- Achieve “3D cutting” on some materials
Rotary Plug
- Work on round items such as tumbler,mug and bamboo pipe by laser cutting machine.
Exhaust System
- Ensure the work pieces and laser cutter machine inside be clean.
Air Assist
- Blowing air to prevent the material being burned

Technical Specifications

Laser System		Odin 22
Laser Tube Wattage		30 Watt
Working Area		559 x 381 mm (22″ x 15″)
Table Size		625 x 440 mm (24.6″ x 17.3″)
Dimensions(W x D x H)		1030x860x1090mm (40″ x 34″ x 43″)
Laser Type		Radio Frequency Laser Tube
Cooling		Air Cooled
Maximum Speed		2000MM/S
Speed and Power Control		Computer or manually controlled speed and power from 0-100%.Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes		Optimized raster,vector,and combined mode
Resolution(DPI)		User controlled from 100 to 100DPI(standard laser head)
Computer Interface		Ethernet and USB Connection
Compatible Operating Systems		Windows, Mac, and Linux (Mac and Linux with LightBurn Software)
Buffer Memory		128MB Standard
Display Panel		3.5″ LCD panel showing current file, total working time, laser power, speed, etc…
Electrical Requirements		Requirements110 to 240 volts,50 or 60 Hz,single phase
Z-Axis Height		190mm (7.5″)
Net Weight		125kgs (275lbs)
Motion Control System		High-Speed Stepper Motors
Speed and Power Control(engraving depth)		Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes		Optimized raster, vector, and combined mode
Ventilation System		Integral exhaust fan. There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.
Max Work Height		210 mm (8.2″)
Max. Speed		2000mm/s
Workpiece table		Solid metal blades & Honeycomb table
Max. table load		20kg / 44lbs

To contact Thunder Laser Australia about Thunder Laser Laser Engraving Machine | Odin use Get a quote.

Standard Features

High Speed Motor
- Japanese ORIENTAL motor systems on X and Y axes, with 80 IPS (2000mm/s) and 3G acceleration engraving speed.
New: 100% smoother guide Rail
- Patent guide rail developed by Thunder Laser, less resistance and low noise.
New: 1,000 DPI RF metal laser source
- With excellent quality Beam output and stable laser power, lifespan up to 10,000 hours.
New: Upper & Lower Vent
- To timely remove the heat from material surface.
Dual Air-Assist system
- Adjusting air volume for cutting and engraving separately for different requirements
New: Eightfold Open-flap protection
- Laser will stop if someone open any machine cover during working.
Newly-designed focus lens and mirror holder
- Easier to clean and replace lens and mirrors, Lenses of different FL are swappable in the same mount.
New Housing Design
- Compact, stand included, room for blower and compressor and space saved.
New Auto Focus
- No limitation for materials or working area, more accurate.
New: Drawer for collecting small working pieces
- To make it easier to collecting small working pieces and cleaning up.
Smart Board
- Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving
Visible Red Dot Pointer
- Make the laser beam “visible”.
Honey Comb Table
- Reduces underside reflections.
High Quality Power Cable
- The high-quality electrical connector has low and stable contact resistance.
Heat Alarm Detector
- Heat alarm detector.
Emergency Stop
- Turn off the machine immediately when there is an accident.
Alarm Lamp
- Show the work state and tell when the job is done, more safe for you.
Breaker
- This is a protective conductor, included to prevent shock and/or fire.
Earth Wiring
- Earthing is used to protect you from an electric shock.
3D Engrave
- Engrave high quality 3D photos directly.
3D Cutting
- Achieve “3D cutting” on some materials
Rotary Plug
- Work on round items such as tumbler,mug and bamboo pipe by laser cutting machine.
Exhaust System
- Ensure the work pieces and laser cutter machine inside be clean.
Air Assist
- Blowing air to prevent the material being burned

Technical Specifications

Laser System		Odin 22
Laser Tube Wattage		30 Watt
Working Area		559 x 381 mm (22″ x 15″)
Table Size		625 x 440 mm (24.6″ x 17.3″)
Dimensions(W x D x H)		1030x860x1090mm (40″ x 34″ x 43″)
Laser Type		Radio Frequency Laser Tube
Cooling		Air Cooled
Maximum Speed		2000MM/S
Speed and Power Control		Computer or manually controlled speed and power from 0-100%.Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes		Optimized raster,vector,and combined mode
Resolution(DPI)		User controlled from 100 to 100DPI(standard laser head)
Computer Interface		Ethernet and USB Connection
Compatible Operating Systems		Windows, Mac, and Linux (Mac and Linux with LightBurn Software)
Buffer Memory		128MB Standard
Display Panel		3.5″ LCD panel showing current file, total working time, laser power, speed, etc…
Electrical Requirements		Requirements110 to 240 volts,50 or 60 Hz,single phase
Z-Axis Height		190mm (7.5″)
Net Weight		125kgs (275lbs)
Motion Control System		High-Speed Stepper Motors
Speed and Power Control(engraving depth)		Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes		Optimized raster, vector, and combined mode
Ventilation System		Integral exhaust fan. There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.
Max Work Height		210 mm (8.2″)
Max. Speed		2000mm/s
Workpiece table		Solid metal blades & Honeycomb table
Max. table load		20kg / 44lbs