Tripax - Pumpkin Peeler - Series 7000

Consisting of:

A self-supporting pedestal design complete with a peeling disc which rotates anti-clockwise and is directly driven by an electric induction motor. By holding the pumpkin segments firmly with two hands the operator can apply the peel surface against the peeling disc area. Whilst working the skin segment against the rotating disc you will notice the peel cutting away very quickly and easily, there is no need for pressing the product hard against the rotating disc, as the peel is easily removed.

The peel waste is discharged from underneath via its waste chute and a clear polycarbonate shroud is provided to prevent product from being sprayed toward the operator. There is a water hose connection at the top of the shroud to utilise whilst running to assist with washing the peeling disc and wheel.

The peeler is quite and smooth running and requires near to no maintenance. The peeler body and components constructed from 304
stainless steel with a glass beaded finish. The disc wheel is cast aluminium, and this is easily removed as is the disc to the wheel. Spare peeling disc’s are readily available on request.

Controls:

Easily controlled via a pedestal mounted variable speed drive complete with ON / OFF switch and speed dial to adjust the rotating speed of the peeling disc. It comes complete with a 240V single phase plug and 5m lead.

To contact Tripax about Tripax Pumpkin Peeler - Series 7000 use Get a quote.

Consisting of:

A self-supporting pedestal design complete with a peeling disc which rotates anti-clockwise and is directly driven by an electric induction motor. By holding the pumpkin segments firmly with two hands the operator can apply the peel surface against the peeling disc area. Whilst working the skin segment against the rotating disc you will notice the peel cutting away very quickly and easily, there is no need for pressing the product hard against the rotating disc, as the peel is easily removed.

The peel waste is discharged from underneath via its waste chute and a clear polycarbonate shroud is provided to prevent product from being sprayed toward the operator. There is a water hose connection at the top of the shroud to utilise whilst running to assist with washing the peeling disc and wheel.

The peeler is quite and smooth running and requires near to no maintenance. The peeler body and components constructed from 304
stainless steel with a glass beaded finish. The disc wheel is cast aluminium, and this is easily removed as is the disc to the wheel. Spare peeling disc’s are readily available on request.

Controls:

Easily controlled via a pedestal mounted variable speed drive complete with ON / OFF switch and speed dial to adjust the rotating speed of the peeling disc. It comes complete with a 240V single phase plug and 5m lead.

Read less...

To contact Tripax about Tripax Pumpkin Peeler - Series 7000 use Get a quote.