Turtle Tough Wastewater pH Sensors

The Turtle Tough sensors are specifically designed for your individual waste water monitoring requirements. The Extreme dehydration option allows sensors to be left dry for very long periods of time and still respond instantly and dynamically on re-entry to solution.

This solution has been a huge windfall for manufacturers with batch processes or variable waste water flows, reducing sensor failure and man hours spent removing and changing sensors.

Coat resistant sensor elements and general physical strength allow for strong mechanical cleaning of sensors that have been fouled by inorganic material or surface coatings, further increasing sensor lifetime in the field.

Digital Smart Sensor Technology (DSST)

This sensor is available with our digital smart sensor technology. This plug and play sensor has a quick connect fitting, eliminating the need for hard wiring to the analyser. On-board sensor memory allows the storage of calibration data, analyser configurations and sensor service history.

This allows the sensor to be conveniently maintained and calibrated off-site or in the laboratory and pre-programmed with calibration data and analyser configurations.  This stored information automatically uploads to the analyser upon connection and eliminates the need for any interaction with the analyser, greatly simplifying the change-out of sensors. A service log stored on the sensors is ideal for maintenance and quality assurance records.

• 6m cable
• RYTON with ¾” MNPT Front & Back End
• -5°C to 105°C
• Coat resistant materials reduce fouling
• Acid/Fluoride Resistant
• Ammonia, Chlorine and SulphideGas Resistant
• High Capacity KYNAR Reference
• Extreme Dehydration (optional)
• Proprietary toughened glass
• Digital smart sensor technology (optional)
  • No hard wiring – plug-n-play connectivity
  • Sensor stores calibration data, analyser configuration and sensor history
  • Hot-swap for quick sensor change-out
  • No interaction with analyser – sensor data auto uploads