Flexim’s clamp on flow meter, the FLUXUS® F721, is the most versatile meter in the marketplace today.
Any liquid(huge database of liquids pre-loaded into the clamp on flow meter, challenge us with a new and exotic liquid!);
Any pipe material (PE, PVC, GRP, PPR, concrete-lined etc., along with carbon steel, stainless steel, aluminium, copper… all are easily measured);
Any pipe size (6mm up to 6m diameter)
Any flow rate (0.01-25m/s);
Any temperature (-165…+400°C)
The FLUXUS®F721 Clamp On Flow Meter is designed to withstand harsh, rugged environments. Stainless steel encloses the transducers and the transducer cable; it is also used for the mounting fixture. The transducers are hermetically sealed – there are no weak connection points. The flow computer is enclosed in a robust metal housing, making the clamp on flow meter completely water tight (IP65/67).
Due to its matched and paired transducers as well as temperature compensation (complying with ANSI/ASME regulations), the clamp on flow meter reads zero from the outset, and holds zero for the lifetime of the measurement. Dual microprocessors provide advanced signal evaluation at an extremely high number of measuring cycles per second (up to 1000Hz). All of this means the clamp on flow meter produces stable, reliable flow metering, even under dynamic and difficult conditions.
Using ultrasonic gel to couple the transducers to the pipe is a thing of the past – the transducers can now use an everlasting Viton pad, meaning there is literally no maintenance requirements!
Clamp On Flow Meters are ideal for chemically aggressive or toxic fluids – with the measurement being completely non-invasive, there is no chance of leakage.
The Flexim FLUXUS F721 clamp on flow meter is completely configurable with a wide range of electrical outputs and inputs. Parameters such as temperature, pressure, RPM etc can all be connected into the flow computer, for further calculations such as thermal energy flow, mass flow and density. Process outputs include 4-20mA, relay, Modbus RTU and HART.
Clamps on to the outside of the pipe – no need to cut into the pipe to install the meter making it highly cost effiective.
Maintenance free – no need for continuous work in hazardous areas
Advanced ultrasonic technology for accurate and reliable measurements of slurries or liquids with more than 10% solids
Matched transducers with integrated temperature compensation
Able to accurately take measurements regardless of the pressure or temperature of the liquid going through the pipe
Permanent coupling with unique couplant pads
Simple to use with reliable results
The ideal noninvasive measuring device
A wide range of communications available allowing complete monitoring of processes as well as supervision and control of critical operations
Aquip Systems | Industrial Instrumentation
Aquip Systems is an Australian-owned, multi-disciplined company that has been operating in Australia for over 25 years. We deliver high quality products and specialist services to the petroleum, mining, ...