Unimig MIG Welder | RAZOR 250 SWF

Unimig - MIG Welder | RAZOR 250 SWF Price Guide: $3,995

Supplier: WeldConnect

Unimig - MIG Welder | RAZOR 250 SWF

MIG Welder | RAZOR 250 SWF

Unimig - MIG Welder | RAZOR 250 SWF

The MIG250SWF is an inverter-based MIG welding machine with added MMA and DC TIG function.

11 Recent Views In Stock

Features of this product

Don’t get tied down. A separate wire feeder unit lets you remove the wire feeder from the power source up to a distance of 10m. This is perfect for workshops when moving a complete machine isn’t an option.
This three in one machine, lets you perform MIG, TIG and STICK welding all on one machine. There is also support for both gas-shielded MIG and gasless MIG wire. There is no need to swap between machines, saving you time and setup.
This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed. This also assists in using longer MIG Torches.
This machine is Spool Gun ready, so you have the option of attaching a Spool Gun to run softer core wires such as Aluminium MIG wire. The advantage of the Spool Gun is that you do not need to change the setup of your existing torch or drive roller. The spool gun lets you quickly switch over to get the job done with no downtime.
Push-Pull Guns provide the smoothest wire speed, especially when MIG welding Aluminium. The ‘Pull’ motor in the torch allows the wire to be fed over a much longer distance, giving you more flexibility to move and manoeuvre whilst MIG welding.
Offering nothing but the best, this machine has been designed to offer the highest quality welds available from UNIMIG. With superior welding technology, no corners have been cut to make this machine the most powerful in its class.

Specifications of this product

We have various models and specifications in our range. These details are for the MIG Welder | RAZOR 250 SWF. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

Primary input voltage: 240v single-phase.
Supply plug: no plug supplied (32 amp recommended).
Rated input power (kva): 12.2.
Leff (a): 28.0.
Rated output: 30a/15.5v - 250a/26.5v.
No load voltage (v): 56.5.
Protection class: ip21s.
Insulation class: f.
Power factor: 0.72.
Minimum generator (kva): 13.0.
Since connector: 35/50.
Standard: as/nz60974-1.
Suitable material: mild steel, stainless steel, cast iron, silicon bronze, aluminium, copper.
Warranty (years): 3.
Mig welding current range: 30-250a.
Mig duty cycle @ 40°c: 35% @ 250a.
Mig wire size range: 0.6-1.0mm.
Mig wire spool size: 5kg / 15kg.
Mig welding thickness range: 1-12mm.
Drive roller size: 30/22 (x2).

To contact WeldConnect about Unimig MIG Welder | RAZOR 250 SWF use Get a quote.

Features of this product

Don’t get tied down. A separate wire feeder unit lets you remove the wire feeder from the power source up to a distance of 10m. This is perfect for workshops when moving a complete machine isn’t an option.
This three in one machine, lets you perform MIG, TIG and STICK welding all on one machine. There is also support for both gas-shielded MIG and gasless MIG wire. There is no need to swap between machines, saving you time and setup.
This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed. This also assists in using longer MIG Torches.
This machine is Spool Gun ready, so you have the option of attaching a Spool Gun to run softer core wires such as Aluminium MIG wire. The advantage of the Spool Gun is that you do not need to change the setup of your existing torch or drive roller. The spool gun lets you quickly switch over to get the job done with no downtime.
Push-Pull Guns provide the smoothest wire speed, especially when MIG welding Aluminium. The ‘Pull’ motor in the torch allows the wire to be fed over a much longer distance, giving you more flexibility to move and manoeuvre whilst MIG welding.
Offering nothing but the best, this machine has been designed to offer the highest quality welds available from UNIMIG. With superior welding technology, no corners have been cut to make this machine the most powerful in its class.

Specifications of this product

We have various models and specifications in our range. These details are for the MIG Welder | RAZOR 250 SWF. Get in touch to let us know your requirements so we can quote you on a product that best suits your needs.

Primary input voltage: 240v single-phase.
Supply plug: no plug supplied (32 amp recommended).
Rated input power (kva): 12.2.
Leff (a): 28.0.
Rated output: 30a/15.5v - 250a/26.5v.
No load voltage (v): 56.5.
Protection class: ip21s.
Insulation class: f.
Power factor: 0.72.
Minimum generator (kva): 13.0.
Since connector: 35/50.
Standard: as/nz60974-1.
Suitable material: mild steel, stainless steel, cast iron, silicon bronze, aluminium, copper.
Warranty (years): 3.
Mig welding current range: 30-250a.
Mig duty cycle @ 40°c: 35% @ 250a.
Mig wire size range: 0.6-1.0mm.
Mig wire spool size: 5kg / 15kg.
Mig welding thickness range: 1-12mm.
Drive roller size: 30/22 (x2).

To contact WeldConnect about Unimig MIG Welder | RAZOR 250 SWF use Get a quote.

Let WeldConnect provide you with a quote

Supplier

Supplier: WeldConnect

Location: Hemmant, QLD

Is this your product? Manage products / company details |

Report this product

More from this supplier

See all 10 items

MIG Welder | RAZOR 250 SWF

MIG Welder | RAZOR 250 SWF

Plasma Cutter | VIPER CUT 30

Plasma Cutter | VIPER CUT 30

Welding Inverter | Weldmatic 200i

Welding Inverter | Weldmatic 200i

Fume Extractor | KSZ-3.0D

Fume Extractor | KSZ-3.0D

Weld Cleaning System | TEC

Weld Cleaning System | TEC

PAPR Welding Helmet | Aristo Air

PAPR Welding Helmet | Aristo Air

Welding Helmets | 9100XXi

Welding Helmets | 9100XXi

Table Saw | TS 36-18 LTX BL 254

Table Saw | TS 36-18 LTX BL 254

Wire Feeder | 74 MPa Plus | MR300577

Wire Feeder | 74 MPa Plus | MR300577

Metal Mitre Bandsaw | 280

Metal Mitre Bandsaw | 280

Contact WeldConnect

MIG Welder in Melbourne

MIG Welder in Adelaide

MIG Welder in Sydney

MIG Welder in Darwin

MIG Welder in Brisbane

MIG Welder in Perth

Are you a MIG Welder supplier?

Reach valuable industrial buyers in minutes

Promote key products & content

Drive cost effective & measurable sales

learn more