Unimo CO2 Heat Pump | WW - Water Source ...
Unimo - CO2 Heat Pump | WW - Water Source ( Hot Water & Chilled Water Supply)
Boiler and water chiller all in one machine. Efficiently generate high quality hot water. Cut energy costs by reducing or eliminating traditional water heating equipment
WW – water source heat pump is an industrial/commercial heat pump system that generates hot water and chilled water or hot water by recovering energy from renewable and waste heat sources such as waste water from process, cooling water from conventional cooling tower or ground water/geothermal heat. It uses CO2 (a natural refrigerant) instead of chemical refrigerants such as HCFC/HFC typically used in other heat pump systems.
WW Features:
- Cut energy costs & reduce CO2 footprint
- No combustion, safe to run and no NOx.
- Natural refrigerant CO2 (ODP=0, GWP=1)
- 70 – 100kW heating capacity (up to 90°C hot water)
- 70 – 80kW cooling capacity (down to -9°C chilled water)
- 25kW motor (combined COP <8.0)
To contact MAYEKAWA Australia about Unimo CO2 Heat Pump | WW - Water Source ( Hot Water & Chilled Water Supply) use Get a quote.
WW – water source heat pump is an industrial/commercial heat pump system that generates hot water and chilled water or hot water by recovering energy from renewable and waste heat sources such as waste water from process, cooling water from conventional cooling tower or ground water/geothermal heat. It uses CO2 (a natural refrigerant) instead of chemical refrigerants such as HCFC/HFC typically used in other heat pump systems.
WW Features:
- Cut energy costs & reduce CO2 footprint
- No combustion, safe to run and no NOx.
- Natural refrigerant CO2 (ODP=0, GWP=1)
- 70 – 100kW heating capacity (up to 90°C hot water)
- 70 – 80kW cooling capacity (down to -9°C chilled water)
- 25kW motor (combined COP <8.0)
To contact MAYEKAWA Australia about Unimo CO2 Heat Pump | WW - Water Source ( Hot Water & Chilled Water Supply) use Get a quote.
Unimo WW is a water-source heat pump that supplies hot and chilled water together, or hot water alone, in one machine. It recovers energy from process wastewater, conventional cooling-tower water, groundwater or geothermal heat to produce hot and chilled water. Industrial and commercial operations needing hot water can use a system that runs without combustion and produces no NOx.
- Heating capacity: 70–100 kW; hot water up to 90°C
- Cooling capacity: 70–80 kW; chilled water down to -9°C
- 25 kW motor; combined COP <8.0
- Can reduce or eliminate traditional water-heating equipment
- Reduces CO2 footprint
Source: listing by MAYEKAWA Australia on IndustrySearch · Updated 30 Oct 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by MAYEKAWA Australia on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Hydronic Heat Pump | Intaflo
Heat Pump Air-Cooled Fluid Chiller | Aggreko WCH200
Agridry Closed Cycle Heat Pump Dryers
CO2 Heat Pump | AW – Air Source (Hot Water Supply)
CO2 Heat Pump | AWW – Air/Water Source Dual Mode
Co2 Heat Pump Air Heater | Eco Sirocco
CO2 Heat Pumps I Unimo Water Heat Pump
Heat Pumps I EvitecH Heat Pump
Heat Pumps I MPE Heat Pump
Heat Pumps I HPS Heat Pump
Heat Pumps I LCP
Hot Water Heat Pumps
Space Heating and Cooling Heat Pumps
Air Cooled Heat Pump | HAEevo Tech
Air Cooled Heat Pump | HAries Tech
Commercial Hot Water Heat Pumps
Heat Pump | HeatPro
Heat Pump | ANKI
Inverter Heat Pump Water Chillers | Modular
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales