WAM Septage Receiving Stations

WAM - Septage Receiving Stations

Supplier: WAM Australia Pty Ltd

Septage Receiving Stations

1/3

WAMGROUP Receiving Stations are the ultimate solution for efficient mechanical treatment of septic tank content and sludge from industrial sources.

Efficient Pre-Treatment Solution

In Stock

WASTEMASTER TSB1 performs two different processes: separating solids from the effluent and compacting and de-watering these separated solids. Sewage from septic tanks, interceptors, or industrial plants, collected by special purge tankers, must be pre-treated before introduction into any purification system. Suspended solids are retained by the screen, increasing the liquid level in the front part of the screen. At this point, the screw starts operating, cleaning the screen with brushes fixed on the outer part of the screw flight, removing the material, then de-watering and compacting it.

Function: The machine consists of:

Screen
Conveyor screw
Compactor

The conveyor screw, featuring a shaftless spiral, collects solids from the bottom of the screen, conveying them without any risk of clogging. The compactor, located in the upper part, is equipped with a washing section that reduces organic fractions and uses the conveyor screw for compacting and de-watering the screenings.

Features:

Sturdy metal framework entirely manufactured from 304L/316L stainless steel
Shaftless conveyor screw made from 304/316 stainless steel or special high-resistance steel
Flow rates of up to 30 liters per second (64 cfm) with solids extraction of up to 0.35 dm3/s (0.7 cfm)
Screens with a special mesh suitable for specific waste water and solid characteristics of up to 10 mm particle size
Equipped with quick coupling and Perrot valve

Benefits:

Screening, conveying, and compacting in a single unit using one drive only
Easy installation, low maintenance, and operating costs
Outdoor installation with optional anti-freeze accessories
No clogging even in the presence of fibers, due to shaftless screw design
Odor-free
No civil works required

Options:

Perrot valve
Alternative screen types and sizes
Drive guard
Alternative voltage and frequency
Alternative degree of motor protection
Control panel
Pipe washing system
Discharge module heating

Accessories:

Bag clamping system
Endless tube

To contact WAM Australia Pty Ltd about WAM Septage Receiving Stations use Get a quote.

Function: The machine consists of:

Screen
Conveyor screw
Compactor

Features:

Sturdy metal framework entirely manufactured from 304L/316L stainless steel
Shaftless conveyor screw made from 304/316 stainless steel or special high-resistance steel
Flow rates of up to 30 liters per second (64 cfm) with solids extraction of up to 0.35 dm3/s (0.7 cfm)
Screens with a special mesh suitable for specific waste water and solid characteristics of up to 10 mm particle size
Equipped with quick coupling and Perrot valve

Benefits:

Screening, conveying, and compacting in a single unit using one drive only
Easy installation, low maintenance, and operating costs
Outdoor installation with optional anti-freeze accessories
No clogging even in the presence of fibers, due to shaftless screw design
Odor-free
No civil works required

Options:

Perrot valve
Alternative screen types and sizes
Drive guard
Alternative voltage and frequency
Alternative degree of motor protection
Control panel
Pipe washing system
Discharge module heating

Accessories:

Bag clamping system
Endless tube

Read less...

To contact WAM Australia Pty Ltd about WAM Septage Receiving Stations use Get a quote.

AI Overview BETA

The WAM WASTEMASTER TSB1 is a septage receiving station that separates solids from effluent, then compacts and de-waters the screenings. Its shaftless screw carries solids from the screen without clogging, even when the material contains fibres. Sites receiving sewage from septic tanks, interceptors or industrial plants can pre-treat it before introducing it to a purification system.