Weldmax TIG Welder | 250

Weldmax - TIG Welder | 250

Supplier: Weldmax

TIG Welder | 250

New inverter welding powersource designed for AC TIG of Aluminium and DC TIG welding of Steel and Stainless. HF (high frequency) or Lift-Arc ignition feature. MMA mode is also available.

In Stock

Features of this product

Slope up (from 0 to 10 seconds), Slope down (from 0 to 10 seconds), pre-gas (from 0 to 25 seconds) and post-gas (from 0 to 25 seconds)
Synergic post-gas
Possibility to set the initial and final current time
Base current, current 2, initial and final current both in absolute value and in percentage with respect to the main current
PULSED TIG ideal for welding on thin thicknesses (frequency adjustable from 0.1 to 5000 Hz), with adjustment of base and
peak current and duty cycle throughout the frequency range.
AC process with rounded square wave to reduce arc noise while preserving welding quality
TIG MIX AC function, which allows you to alternate between AC time and DC time
‘TACK’ function, which allows joining two flaps with high penetration, speed, and precision as for the MMA mode, the adjustable parameters are the Hot Start and the Arc Force. There is also the VRD function required for use in high-risk environments. Possibility of remote adjustment by manual controls, by a foot pedal, or by Tig up-down torch.

To contact Weldmax about Weldmax TIG Welder | 250 use Get a quote.

Features of this product

Slope up (from 0 to 10 seconds), Slope down (from 0 to 10 seconds), pre-gas (from 0 to 25 seconds) and post-gas (from 0 to 25 seconds)
Synergic post-gas
Possibility to set the initial and final current time
Base current, current 2, initial and final current both in absolute value and in percentage with respect to the main current
PULSED TIG ideal for welding on thin thicknesses (frequency adjustable from 0.1 to 5000 Hz), with adjustment of base and
peak current and duty cycle throughout the frequency range.
AC process with rounded square wave to reduce arc noise while preserving welding quality
TIG MIX AC function, which allows you to alternate between AC time and DC time
‘TACK’ function, which allows joining two flaps with high penetration, speed, and precision as for the MMA mode, the adjustable parameters are the Hot Start and the Arc Force. There is also the VRD function required for use in high-risk environments. Possibility of remote adjustment by manual controls, by a foot pedal, or by Tig up-down torch.

Read less...

To contact Weldmax about Weldmax TIG Welder | 250 use Get a quote.

AI Overview BETA

Weldmax 250 is a new inverter welding power source for AC TIG on aluminium, DC TIG on steel and stainless steel, and MMA welding. Pulsed TIG has an adjustable frequency from 0.1 to 5,000 Hz, supporting welding on thin material. Joining two flaps is the task for TACK, which offers high penetration, speed and precision.