The integrated by-pass contactor ADX...B types only, drastically limits dissipation, as result equipment for electric panel cooling ventilation can be eliminated and the enclosure size can be reduced as well.
Digital inputs and programmable relay outputs. Analog input (0...10V, 0...20mA or 4...20mA) for ramp acceleration and/or deceleration, motor starting and stopping control thresholds, programmable relay enable and disable control thresholds. Analogue output (0...10V, 0...20mA or 4...20mA) for current, torque, motor thermal status and power factor readings. Input programming for the second motor.
Input voltage: • 208-500VAC ±10% for ADX...B • 208-415VAC ±10% for ADX...
Mains frequency: 50-60Hz ±5%
Auxiliary supply voltage: 208-240VAC ±10%
Auxiliary consumption: 20VA
Rated starter current Ie: • 17-245A for ADX...B • 310-1200A for ADX...
– Motor current: 0.5-1 Ie
Overload current: • 105% Ie for ADX...B • 115% Ie for ADX...
Certifications and compliance Certifications obtained: EAC for all; CCC for ADX 0110B and ADX 0125B types only. Compliant with standard: IEC/EN 60947-1, IEC/EN 60947-4-2.
Mechtric | Industrial Automation & Control Products
The Mechtric Group is a 100% Australian owned group of companies specialising in the supply of electrical and mechanical engineering products.
Our product range includes industrial automation and control equipment including Lovato low voltage switchgear, soft starters and instrumentation, Delta Electronics variable speed drives and automation products, Sirena, E2S, Auer and C&S industrial signalling products, LIFAS power factor correction equipment, DINEL and FINTEK level controls, Fantini Cosmi flow, level and temperature controls, Bayham level gauges and controls, Ravioli pendants and limit switches, SITI reduction gearboxes, Mechtric 3 phase motors, COEL brake motors, Carpanelli motors, Drive systems DC motors, Minarik DC motor controllers.