Airseeder Head Blockage Monitor Kit – Twin ...
Airseeder Head Blockage Monitor Kit – Twin Shoot with 12 Sensors
The Farmscan Airseeder Head Blockage Monitor 1020T continually checks your machine and warns you before major blockages end up costing you time and money.
No more costly unsown strips, great for seed and Super
Fully sealed impact sensors equipped with a bright red LED are bolted to each primary and secondary distribution heads.
Sensors are then interconnected on a simple party line cable that runs across the implement, avoiding the need for messy separate wires to each sensor.
As material flows, the sensor listens to the sound level according to sowing rates of both seed and fertiliser, all the operator adjusts is the sensitivity control on each until the cab warning light remains just off – simple as that!
A drop in flow rate or blockage at any primary or secondary head will activate the red LED at the sensor causing the cab alarm and warning light to activate.
By switching to Hold, the operator can freeze the system and a quick inspection of all sensors will immediately pinpoint the problem.
The 1020 assists in picking many other problems with airseeders such as fan too slow or not engaged, disconnected and blocked primary hoses, lids not properly shut, empty bins, broken drives etc.
To contact Farmscan Pty Ltd about Airseeder Head Blockage Monitor Kit – Twin Shoot with 12 Sensors use Get a quote.
No more costly unsown strips, great for seed and Super
Fully sealed impact sensors equipped with a bright red LED are bolted to each primary and secondary distribution heads.
Sensors are then interconnected on a simple party line cable that runs across the implement, avoiding the need for messy separate wires to each sensor.
As material flows, the sensor listens to the sound level according to sowing rates of both seed and fertiliser, all the operator adjusts is the sensitivity control on each until the cab warning light remains just off – simple as that!
A drop in flow rate or blockage at any primary or secondary head will activate the red LED at the sensor causing the cab alarm and warning light to activate.
By switching to Hold, the operator can freeze the system and a quick inspection of all sensors will immediately pinpoint the problem.
The 1020 assists in picking many other problems with airseeders such as fan too slow or not engaged, disconnected and blocked primary hoses, lids not properly shut, empty bins, broken drives etc.
To contact Farmscan Pty Ltd about Airseeder Head Blockage Monitor Kit – Twin Shoot with 12 Sensors use Get a quote.
The Farmscan Airseeder Head Blockage Monitor 1020T is a twin-shoot kit with 12 sensors that monitors material flow through an airseeder. Its sensors respond to sound levels set for seed and fertiliser rates, triggering a cab alarm when flow drops or a head blocks. Airseeder operators can use Hold to freeze the system and inspect sensor LEDs to locate a problem.
- Fully sealed impact sensors have a bright red LED
- Sensors bolt to primary and secondary distribution heads
- Party-line cable connects sensors across the implement
- Adjust each sensor’s sensitivity until the cab warning light stays just off
- Detects fan faults, primary hose faults, open lids, empty bins and broken drives
Source: listing by Farmscan Pty Ltd on IndustrySearch · Updated 1 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Farmscan Pty Ltd on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
-280x280-state_7.jpg)
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales