Vigil - Anti Slip Ladder Rung Covers Get latest price

Anti Slip Ladder Rung Covers

Anti Slip Ladder Rung Covers

Anti Slip Ladder Rung Covers

Anti Slip Ladder Rung Covers

20 Recent Views In Stock

Severe weather, spillages and even immersion in viscous or corrosive fluids won't affect the performance of the Ladder Rung Cover or its life span.

Vigil Antislip ladder rung covers are manufactured with a square, tubular or custom profile to suit any diameter or cross section. Standard lengths vary from 200mm for foot only protection through to 450mm.

Ladder rung covers are manufactured in light industrial grade to ensure antislip protection without being too abrasive so as to damage bare hands. The safety yellow colour offers excellent visual highlighting and they can simply be fastened with adhesive, self tappers or pop rivets.

As ladders are often low-use, Vigil Antislip ladder rung covers are usually expected to last the life of your project.

Specifications

Steel Foundation	Splash Zones	1.2mm Grade 316 Stainless Steel
	Acidic areas	1.2mm Grade 316 Stainless Steel
	All other areas	1.2mm AM100 Colorbond Steel
Fabric Medium		Floating on steel foundation and integrated with key coat of resin system
Resin System		All layers hand laminated – not sprayed
		Cured at optimum temperature and humidity – no oven use
		Resistant to all solvents, petroleum products and acid solutions
		Must not contain any pin-prick holes or bubbles.
Aggregate	Silicone Carbide (SiC)	Moh’s hardness rating of 9.2 – 9.5
		Actual Hardness : 2,480Kg / mm2
Size of Aggregate	Offshore Grade	12/20 mesh matrix
	Industrial Grade	20 Mesh
	Light Industrial Grade	24 Mesh
	Barefoot Grade	100 Mesh
	Commercial Grade	46 Mesh
Warranty		10 Years

 

Standard Dimensions
A	20mm	0.8?
	25mm	1.0?
	30mm	1.2?
	35mm	1.4?
B	200mm	7.9?
	300mm	11.8?
	450mm	17.7?
Standard Grade	Light Industrial

A: Diameter of the Existing Rung: Because ladder rungs are manufactured in various diameters, Vigil Antislip Ladder Rung Covers increase in size from 20mm to 35mm in standard 5mm increments. It is important to measure the diameter correctly to ensure a Ladder Rung Cover of tight fit is supplied.

B: Width Required: Most ladders are 350mm – 400mm wide, however they may go up to 500mm. Standard Ladder Rung Cover widths are from 200mm to 450mm in 50mm increments, 300mm Ladder Rung Covers are the most common size, however, if foot protection only is required, 200mm Ladder Rung Covers can be installed in the centre of the rungs so that personnel’s hands can still grip the bare rung on either side of the Ladder Rung Cover.

Grade

Ladder Rung Covers are only manufactured in Light Industrial grade. This grade offers excellent antislip properties without being too severe to damage personnel’s hands.

Colours

Safety Yellow is always recommended for Ladder Rung Covers to improve visibility. The full range of Vigil colours is available on request.

Warranty

As innovators and pioneers in the safety industry, it is important that we lead by example.

Our production manuals contain the QA/QC requirements for every process. As a basic rule, every production team member acts as a buyer and a seller. When a process is completed, the person who conducted that process becomes the internal seller of the product to that stage. It is then passed on to the next person in the production process – the internal buyer – who checks all specifications, etc. to ensure the previous process was carried out in accordance with requirements.

The product continues through the production process that way, being rigorously checked by the ‘internal buyer’ at every stage.

Every process is also signed off by the operator on the Job Card. This ensures quality is maintained and checked throughout all processes rather than just at the packaging stage. All raw materials are checked upon receipt, resins are tested for hardness and so on.

When the products are completed, the Job Card number becomes the Warranty Number and this is stamped on the underside of every product so it can be traced should there ever be a future issue.

The 10 Year Replacement Warranty Certificate provided with every Class 1 is signed by the Managing Director and the Production Manager. The Job Cards are archived for a minimum of 10 years so they may be recovered and the production process traced if necessary.

Class 1

Steel Foundation	Splash Zones	1.2mm Grade 316 Stainless Steel
	Acidic areas	1.2mm Grade 316 Stainless Steel
	All other areas	1.2mm AM100 Colorbond Steel
Fabric Medium		Floating on steel foundation and integrated with key coat of resin system
Resin System		All layers hand laminated – not sprayed
		Cured at optimum temperature and humidity – no oven use
		Resistant to all solvents, petroleum products and acid solutions
		Must not contain any pin-prick holes or bubbles.
Aggregate	Silicone Carbide (SiC)	Moh’s hardness rating of 9.2 – 9.5
		Actual Hardness : 2,480Kg / mm2
Size of Aggregate	Offshore Grade	12/20 mesh matrix
	Industrial Grade	20 Mesh
	Light Industrial Grade	24 Mesh
	Barefoot Grade	100 Mesh
	Commercial Grade	46 Mesh
Warranty		10 Years

Read more...

To contact Vigil Antislip / Prism about Vigil Anti Slip Ladder Rung Covers use Get a quote.

Severe weather, spillages and even immersion in viscous or corrosive fluids won't affect the performance of the Ladder Rung Cover or its life span.

Vigil Antislip ladder rung covers are manufactured with a square, tubular or custom profile to suit any diameter or cross section. Standard lengths vary from 200mm for foot only protection through to 450mm.

Ladder rung covers are manufactured in light industrial grade to ensure antislip protection without being too abrasive so as to damage bare hands. The safety yellow colour offers excellent visual highlighting and they can simply be fastened with adhesive, self tappers or pop rivets.

As ladders are often low-use, Vigil Antislip ladder rung covers are usually expected to last the life of your project.

Specifications

Steel Foundation	Splash Zones	1.2mm Grade 316 Stainless Steel
	Acidic areas	1.2mm Grade 316 Stainless Steel
	All other areas	1.2mm AM100 Colorbond Steel
Fabric Medium		Floating on steel foundation and integrated with key coat of resin system
Resin System		All layers hand laminated – not sprayed
		Cured at optimum temperature and humidity – no oven use
		Resistant to all solvents, petroleum products and acid solutions
		Must not contain any pin-prick holes or bubbles.
Aggregate	Silicone Carbide (SiC)	Moh’s hardness rating of 9.2 – 9.5
		Actual Hardness : 2,480Kg / mm2
Size of Aggregate	Offshore Grade	12/20 mesh matrix
	Industrial Grade	20 Mesh
	Light Industrial Grade	24 Mesh
	Barefoot Grade	100 Mesh
	Commercial Grade	46 Mesh
Warranty		10 Years

 

Standard Dimensions
A	20mm	0.8?
	25mm	1.0?
	30mm	1.2?
	35mm	1.4?
B	200mm	7.9?
	300mm	11.8?
	450mm	17.7?
Standard Grade	Light Industrial

A: Diameter of the Existing Rung: Because ladder rungs are manufactured in various diameters, Vigil Antislip Ladder Rung Covers increase in size from 20mm to 35mm in standard 5mm increments. It is important to measure the diameter correctly to ensure a Ladder Rung Cover of tight fit is supplied.

B: Width Required: Most ladders are 350mm – 400mm wide, however they may go up to 500mm. Standard Ladder Rung Cover widths are from 200mm to 450mm in 50mm increments, 300mm Ladder Rung Covers are the most common size, however, if foot protection only is required, 200mm Ladder Rung Covers can be installed in the centre of the rungs so that personnel’s hands can still grip the bare rung on either side of the Ladder Rung Cover.

Grade

Ladder Rung Covers are only manufactured in Light Industrial grade. This grade offers excellent antislip properties without being too severe to damage personnel’s hands.

Colours

Safety Yellow is always recommended for Ladder Rung Covers to improve visibility. The full range of Vigil colours is available on request.

Warranty

As innovators and pioneers in the safety industry, it is important that we lead by example.

Our production manuals contain the QA/QC requirements for every process. As a basic rule, every production team member acts as a buyer and a seller. When a process is completed, the person who conducted that process becomes the internal seller of the product to that stage. It is then passed on to the next person in the production process – the internal buyer – who checks all specifications, etc. to ensure the previous process was carried out in accordance with requirements.

The product continues through the production process that way, being rigorously checked by the ‘internal buyer’ at every stage.

Every process is also signed off by the operator on the Job Card. This ensures quality is maintained and checked throughout all processes rather than just at the packaging stage. All raw materials are checked upon receipt, resins are tested for hardness and so on.

When the products are completed, the Job Card number becomes the Warranty Number and this is stamped on the underside of every product so it can be traced should there ever be a future issue.

The 10 Year Replacement Warranty Certificate provided with every Class 1 is signed by the Managing Director and the Production Manager. The Job Cards are archived for a minimum of 10 years so they may be recovered and the production process traced if necessary.

Class 1

Steel Foundation	Splash Zones	1.2mm Grade 316 Stainless Steel
	Acidic areas	1.2mm Grade 316 Stainless Steel
	All other areas	1.2mm AM100 Colorbond Steel
Fabric Medium		Floating on steel foundation and integrated with key coat of resin system
Resin System		All layers hand laminated – not sprayed
		Cured at optimum temperature and humidity – no oven use
		Resistant to all solvents, petroleum products and acid solutions
		Must not contain any pin-prick holes or bubbles.
Aggregate	Silicone Carbide (SiC)	Moh’s hardness rating of 9.2 – 9.5
		Actual Hardness : 2,480Kg / mm2
Size of Aggregate	Offshore Grade	12/20 mesh matrix
	Industrial Grade	20 Mesh
	Light Industrial Grade	24 Mesh
	Barefoot Grade	100 Mesh
	Commercial Grade	46 Mesh
Warranty		10 Years

Read less...

To contact Vigil Antislip / Prism about Vigil Anti Slip Ladder Rung Covers use Get a quote.