Vigil Anti Slip Vinyl Deck

Vigil - Anti Slip Vinyl Deck

Anti Slip Vinyl Deck

Newly laid concrete or vinyl flooring can appear safe, but can still cause just as much damage as old surfaces worn smooth by use. Add water or fluids of any kind, and the danger intensifies dramatically. Injuries will occur.

15 Recent Views In Stock

Vigil Antislip Vinyl Deck has been designed to eradicate the risk of injuries, as well as to control traffic flows. It is a vital addition to the flooring of any areas where there is heavy spillage or spoilage, and for all newly laid floors.

Simple to apply permanently to any surface, Vinyl Deck can easily be cut to fit the site without impairing it’s anti-slip properties or precipitating delamination. Whether used in customer areas or in wet areas of canteens and changerooms, it will not fade, crack, lift or delaminate.

Vinyl Deck is also suitable for use on ramps and walkways, which can be the source of serious injuries if left untreated. Due to it’s inherent flexibility, Vinyl Deck is also ideal for use on odd shaped or curved surfaces.

Product Specifications

Dimensions

Standard Dimensions
A	200mm	7.9″
	600mm	23.6″
B	450mm	17.7″
	600mm	23.6″
	750mm	29.5″
	900mm	35.5″
	1200mm	47.2″
Standard Grades	Barefoot, Commercial, Industrial, Offshore

A: Length of Vinyl Deck: There are two standard lengths; 600mm and 200mm. When laid, each sheet of Vinyl Deck can be spaced up to 150mm from the next sheet because on a straight walk way it is only necessary for personnel to achieve either heel or toe contact to avoid accidents. By using 200mm sheets, there is less antislip required per square metre, however, installation can take longer to perform.

B: Width of Vinyl Deck: As with Metal Deck, Vinyl Deck need not cover the entire width of the walkway or ramp. personnel tend to walk within 100mm from the edges of walkways so it is recommended that Vinyl Deck 150mm – 300mm narrower than the overall walkway be ordered, ie. if ordering Vinyl Deck for an 800mm wide walkway, 600mm wide Vinyl Deck will provide ample protection.

Grades

Vinyl Deck is available in four standard grades, each with a specific application in mind.

GRADE	APPLICATION
Barefoot	Specifically designed for use in hospitals or nursing homes where a very fine grade is required for areas where commercial grade is too abrasive for sensitive bare feet.
Commercial	Apply in areas where heavy spillage or soilage does not occur.
Industrial	Designed for external areas where there may be spillage and/or soilage from lubricants.
Offshore	Ideal for areas where there is a high buildup of grease or oil. This surface is the most severe and is not affected by very heavy spillage and soilage of chemicals or lubricants.

Colours

Safety Yellow
Royal Blue
Ochre
Slate/Black
Rust
Tropical Green
Chocolate Brown
Platinum (also available as Off White)
Cardinal Red

Warranty

As innovators and pioneers in the safety industry, it is important that we lead by example.

Our production manuals contain the QA/QC requirements for every process. As a basic rule, every production team member acts as a buyer and a seller. When a process is completed, the person who conducted that process becomes the internal seller of the product to that stage. It is then passed on to the next person in the production process – the internal buyer – who checks all specifications, etc. to ensure the previous process was carried out in accordance with requirements.

The product continues through the production process that way, being rigorously checked by the ‘internal buyer’ at every stage.

Every process is also signed off by the operator on the Job Card. This ensures quality is maintained and checked throughout all processes rather than just at the packaging stage. All raw materials are checked upon receipt, resins are tested for hardness and so on.

When the products are completed, the Job Card number becomes the Warranty Number and this is stamped on the underside of every product so it can be traced should there ever be a future issue.

The 10 Year Replacement Warranty Certificate provided with every Class 1 is signed by the Managing Director and the Production Manager. The Job Cards are archived for a minimum of 10 years so they may be recovered and the production process traced if necessary.

Vinyl Deck Specification

Foundation		1.5mm Armstrong Nylex Armalon
Resin System	Ciba Geigy Aradur Epoxy System	Low viscosity resin system applied to softened surface as ‘key coat’, high viscosity resin system applied to key coat within 24 hours.
		Cured at optimum temperature and humidity – no oven use
Aggregate	Silicone Carbide (SiC)	Hardness: 2,480Kg / mm2
Size of Aggregate	Commercial Grade	46 Mesh
	Light Industrial Grade	24 Mesh
	Industrial Grade	20 Mesh
Warranty		5 Years

To contact Vigil Antislip / Prism about Vigil Anti Slip Vinyl Deck use Get a quote.

Product Specifications

Dimensions

Standard Dimensions
A	200mm	7.9″
	600mm	23.6″
B	450mm	17.7″
	600mm	23.6″
	750mm	29.5″
	900mm	35.5″
	1200mm	47.2″
Standard Grades	Barefoot, Commercial, Industrial, Offshore

Grades

Vinyl Deck is available in four standard grades, each with a specific application in mind.

GRADE	APPLICATION
Barefoot	Specifically designed for use in hospitals or nursing homes where a very fine grade is required for areas where commercial grade is too abrasive for sensitive bare feet.
Commercial	Apply in areas where heavy spillage or soilage does not occur.
Industrial	Designed for external areas where there may be spillage and/or soilage from lubricants.
Offshore	Ideal for areas where there is a high buildup of grease or oil. This surface is the most severe and is not affected by very heavy spillage and soilage of chemicals or lubricants.

Colours

Safety Yellow
Royal Blue
Ochre
Slate/Black
Rust
Tropical Green
Chocolate Brown
Platinum (also available as Off White)
Cardinal Red

Warranty

As innovators and pioneers in the safety industry, it is important that we lead by example.

The product continues through the production process that way, being rigorously checked by the ‘internal buyer’ at every stage.

When the products are completed, the Job Card number becomes the Warranty Number and this is stamped on the underside of every product so it can be traced should there ever be a future issue.

Vinyl Deck Specification

Foundation		1.5mm Armstrong Nylex Armalon
Resin System	Ciba Geigy Aradur Epoxy System	Low viscosity resin system applied to softened surface as ‘key coat’, high viscosity resin system applied to key coat within 24 hours.
		Cured at optimum temperature and humidity – no oven use
Aggregate	Silicone Carbide (SiC)	Hardness: 2,480Kg / mm2
Size of Aggregate	Commercial Grade	46 Mesh
	Light Industrial Grade	24 Mesh
	Industrial Grade	20 Mesh
Warranty		5 Years

Read less...

To contact Vigil Antislip / Prism about Vigil Anti Slip Vinyl Deck use Get a quote.

AI Overview BETA

Vigil Vinyl Deck is an anti-slip vinyl sheet that installers apply permanently to floors to manage foot traffic in treated areas. Its flexibility lets installers fit the sheets to curved or irregular surfaces. Hospitals and nursing homes can use the Barefoot grade, made for areas where Commercial grade is too abrasive for sensitive bare feet.

Offshore suits heavy grease or oil buildup; Industrial suits external lubricant spillage
Standard sheet lengths: 200 mm and 600 mm
Cut to fit without affecting anti-slip properties or causing delamination
Silicon carbide aggregate: 2,480 Kg/mm² hardness
5-year warranty

Source: listing by Vigil Antislip / Prism on IndustrySearch · Updated 1 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Vigil Antislip / Prism provide you with a quote