Auto and Industrial Equipment Bead Blast ...
Auto and Industrial Equipment - Bead Blast Cabinets
We offer a range of quality Australian manufactured steel cabinets for various types of finishing operations. Cabinets from 800mm - 1800mm wide with suction or pressure blast and standard or reverse pulse dust collectors available.
Bead Blast Cabinets
It would be easier to consider cleaning, peening and finishing from the single perspective of surface preparation, but that is only part of the story. We believe that each function must be seen as a carefully fashioned part of the total plant operation system. We therefore strive to give each of our products a distinctive, precise balance in engineering design. In addition, we offer a broad variety of options and accessories, we recognise that industrial requirements are so numerous and complex that just one or two designs would not suit all applications. Our engineering ensures that you are receiving the most advanced designs available.
Summary
There are two techniques of enclosed cabinet blast cleaning, Suction and Pressure Blast, differ sufficiently enough to provide a wide choice of qualities and characteristics for selection of the ideal cabinet for your requirements.
Suction Blast combines the advantages of minimal compressed air requirements, standard mesh media and simple operating technique.
Pressure Blast offers the ultimate in blasting to provide an accelerated rate of cleaning, 3-4 times faster than suction blast.
Both types require Dust Collectors in order to make our blasting system more efficient. We have developed two integrated dust collector designs. These finely balanced units provide maximum cabinet visibility and efficiency.
CS Suction Blast Cabinet
Abrasive is fed to a standard 8mm Tungsten Suction Gun from the cabinet hopper. The principle is a venturi action (suction) blasting using a foot operated on/off pedal, connected to the suction gun. This concept is ideal for general light blasting using a variety of fine to mediaum abrasives, e.g. No1 to 4 Glass impact spheres or Garnet 60/30.
CP Pressure Blast Cabinet
Abrasive is fed to a standard 4.8mm Tungsten Nozzle from a 20L pressure vessel fitted below the cabinet hopper. The principle is low to high pressure blasting using a foot operated on/off pedal. This concept is ideal for production type blasting using a variety of fine to medium and coarse abrasives, e.g. No 1 to 4 Glass impact spheres, Garnet 60/30 and steel grits.
Gloves
Heavy duty 680mm rubber gloves.
Work Floor
The work floor is steel perforated plate.
Reverse Pulse and Drum Type Dust Collectors
All models are supplied with 200L Drum Filter as standard. A Reverse Pulse Cartridge filter can be supplied as an option.
Applications
- General Automotive
- Engine Reconditioning
- Excavation Workshops
- Mining
- Truck Workshops
- Manufacturing
- Parts Painting and Preparation
- Rust Removal
- Paint Removal
- Glass Etching
- Aviation
- Electrical
- Marine
To contact Auto and Industrial Equipment about Auto and Industrial Equipment Bead Blast Cabinets use Get a quote.
Bead Blast Cabinets
It would be easier to consider cleaning, peening and finishing from the single perspective of surface preparation, but that is only part of the story. We believe that each function must be seen as a carefully fashioned part of the total plant operation system. We therefore strive to give each of our products a distinctive, precise balance in engineering design. In addition, we offer a broad variety of options and accessories, we recognise that industrial requirements are so numerous and complex that just one or two designs would not suit all applications. Our engineering ensures that you are receiving the most advanced designs available.
Summary
There are two techniques of enclosed cabinet blast cleaning, Suction and Pressure Blast, differ sufficiently enough to provide a wide choice of qualities and characteristics for selection of the ideal cabinet for your requirements.
Suction Blast combines the advantages of minimal compressed air requirements, standard mesh media and simple operating technique.
Pressure Blast offers the ultimate in blasting to provide an accelerated rate of cleaning, 3-4 times faster than suction blast.
Both types require Dust Collectors in order to make our blasting system more efficient. We have developed two integrated dust collector designs. These finely balanced units provide maximum cabinet visibility and efficiency.
CS Suction Blast Cabinet
Abrasive is fed to a standard 8mm Tungsten Suction Gun from the cabinet hopper. The principle is a venturi action (suction) blasting using a foot operated on/off pedal, connected to the suction gun. This concept is ideal for general light blasting using a variety of fine to mediaum abrasives, e.g. No1 to 4 Glass impact spheres or Garnet 60/30.
CP Pressure Blast Cabinet
Abrasive is fed to a standard 4.8mm Tungsten Nozzle from a 20L pressure vessel fitted below the cabinet hopper. The principle is low to high pressure blasting using a foot operated on/off pedal. This concept is ideal for production type blasting using a variety of fine to medium and coarse abrasives, e.g. No 1 to 4 Glass impact spheres, Garnet 60/30 and steel grits.
Gloves
Heavy duty 680mm rubber gloves.
Work Floor
The work floor is steel perforated plate.
Reverse Pulse and Drum Type Dust Collectors
All models are supplied with 200L Drum Filter as standard. A Reverse Pulse Cartridge filter can be supplied as an option.
Applications
- General Automotive
- Engine Reconditioning
- Excavation Workshops
- Mining
- Truck Workshops
- Manufacturing
- Parts Painting and Preparation
- Rust Removal
- Paint Removal
- Glass Etching
- Aviation
- Electrical
- Marine
To contact Auto and Industrial Equipment about Auto and Industrial Equipment Bead Blast Cabinets use Get a quote.
Auto and Industrial Equipment makes bead blast cabinets for enclosed abrasive cleaning and surface finishing, with widths ranging from 800 mm to 1,800 mm for different finishing jobs. Pressure-blast cabinets clean 3–4 times faster than suction-blast cabinets and suit production-type blasting. Automotive and truck workshops can use these cabinets when their work includes rust removal.
- CS suction cabinet uses a standard 8 mm tungsten gun
- CP pressure cabinet uses a 20 L vessel and standard 4.8 mm tungsten nozzle
- All models include a 200 L drum filter as standard
- Reverse-pulse cartridge filter available as an option
- Heavy-duty 680 mm rubber gloves
Source: listing by Auto and Industrial Equipment on IndustrySearch · Updated 27 Oct 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Auto and Industrial Equipment on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Air Blast Cabinet | Wet Blast Equipment
Pressure Blast Cabinet | ABD-1300
Vacuum Injection Blast Cabinet | ABDI-1000
Pressure Blast Cabinet | CP1200RP
Suction Blast Cabinet | CS1000
Abrasive Air Blast Cabinet | Junior
Air Blast Cabinets | Handykleen
Air Blast Cabinets | Handykleen MKII
Air Blast Cabinets | Cyclone 68
Air Blast Cabinets | Econoblast 99P
Pressure Blast Cabinet | CP800
Tumble Blast Machine | GW18
Formula Blast Cabinet Range
220L Air Blast Cabinet
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales