Automatic Slitter | Marxman Pro - IndustrySearch Australia

No burrs, accurate slits & lengths, SWI paid particular attention to the traditional problems the slitter operator faces. Each issue is addressed with carefully engineered solutions. This provides fuss-free, accurate slitting and blanking. For a complete package, SWI offers a range of recoiling and uncoiling solutions to suit every budget.

The Marxman Pro can effortlessly produce an astonishing throughput with minimal operator intervention. Existing installations consistently produce around 200 parts-per-hour of machine runtime.

SWI’s ShopLink software links the SWI Slitter and SWI Folder together to eliminate shop floor data entry. The barcodes produced by ShopLink can be scanned at the SWI Folder to instantly load the folding program for each part. ShopLink can also be used to record coil consumption, production date & also keeps track of offcut stock.

Features:

Material up to 16 gauge (1.6 mm)
All Shafts are Chrome Plated and Induction Hardened
8 Sets of Slitting Blades
23″ Touchscreen
Powered Five Roll Straightener
Shoplink Integration Streamlines Production
Automatic, Easy-To-Use Nesting Function
Part-Cut Any Slit, No Unsightly Damage to Adjacent Parts
20 Minute Slitter Blade Change Out
Networkable and Remotely Accessible
Coil Management Software
Maintenance Alerts via Email
Couple with a Wide Range of SWI Uncoilers & Recoilers
Label Printer and Applicator

Specifications:

Maximum Speed: 50m/min (150f/min)
Length Repeatability: ±1mm (±0.040”)
Maximum Coil Width: 1244mm (49″)
Minimum Coil Width: 200mm (8”)
Electrical Supply: 415V/3PH/50-60HZ
Label Printer System: Zebra Z4 or similar
Label Size: 75mm x 75mm (3″ x 3″)
Part Cut System Minimum Length: 400mm (16″)

Standard Accessories:

Film Applicator
- SWI provides a film applicator that is standard on all slitting/CTL lines. This film application method provides excellent runability and is also easy to adjust. A built-in braking system controls the tension at which the film is applied to the metal.
Feed Table
- All SWI slitting/CTL lines come equipped with in-feed tables standard. This table serves two purposes. The first is, when coupled with an SWI uncoiler, the table allows one person to easily load the material into the machine. The second is to provide an area to easily apply the strippable film.
Part Cut System
- Unique to the Marxman Pro, 2 is the clever Part Cut system. The Part Cut allows ANY slit part to be separated and cut to length independently of adjacent slit parts and does not leave unsightly damage on the adjacent parts.
Automatic Labeling
- Apply labels to each blank. The label includes a barcode that can be scanned at your SWI Simplex or Duplex folder to automatically load the folding program for each work piece. This labeling system is simple and maintenance free.
Auto Knife Positioning
- The Marxman Pro comes standard with 8 sets of slitting knives which can be fully set in a little over 45 seconds. This accessory comes standard with both the Marxman Pro and Marxman Plus.