Automatic Slitter | Marxman Plus

It also includes the same user interface as the fully-featured Marxman Pro. This provides for automatic part nesting, waste minimization and integration with a wide range of business software via ShopLink. It’s also possible to connect an offline label printer to the Plus so that labels can be printed for manual application by the operator.

For a complete package, SWI offers a range of recoiling and uncoiling solutions to suit every budget.

Features:

• Powered Five Roll Straightener
• All Shafts are Chrome Plated and Induction Hardened
• Material up to 18 ga (1.25mm)
• 8 Sets of Slitting Blades
• 17-inch Touchscreen
• Coil Management Software
• ShopLink Integration Streamlines Production
• Automatic, Easy-to-use Nesting Function
• Optional Printer for Offline Manual Function
• 20-minute slitter blade change-out
• Networkable and Remotely Accessible
• Maintenance Alerts via Email
• Couple with a Wide Range of SWI Uncoilers & Recoilers

Specifications:

• Maximum Speed: 50m/min (150FPM)
• Length Repeatability: ±1mm (±0.040”)
• Maximum Coil Width: 1244mm (49″)
• Minimum Coil Width: 200mm (8”)
• Electrical Supply: 415V/3PH/50-60HZ

Standard Accessories:

• Film Applicator
  • SWI  provides a film applicator that is standard on all slitting/CTL lines. This film application method provides excellent runability and is also easy to adjust. A built-in braking system controls the tension at which the film is applied to the metal.
• Feed Table
  • All SWI slitting/CTL lines come equipped with in-feed tables standard. This table serves two purposes. The first is, when coupled with an SWI uncoiler, the table allows one person to easily load the material into the machine. The second is to provide an area to easily apply the strippable film.
• Auto Knife Positioning
  • The Marxman Plus comes standard with 8 pairs of slitting knives which can be fully set in a little over 45 seconds.