Manual Slitter | Marxman SS1220

The Marxman is available with or without slitting knives and has the option of 2 over 3 straightening rolls for processing thick materials. Also available in 61-inch wide model.

For a complete package, SWI offers a range of recoiling and uncoiling solutions to suit every budget.

Features:

• All Shafts are Chrome-Plated and Induction-Hardened
• Line Speed to 50m/min (150 f/min)
• Capacity up to 1.25mm (18ga)
• SIMPLE Touchscreen Controller
• Maintenance Free Knife Locking Mechanism
• Operate from EITHER Side
• 1220mm (4’) or 1500mm (5’) Wide Models
• Auto-Length Calibration
• World Leading Allen Bradley Controller
• Durable Nickel Plate and Powder Coat Finish
• Adjustable Guides for All Coil Widths
• Electric Drive Guillotine – No Oil Leaks!
• Built-in Slitter Knife Set-up Gauge
• Auto Reverse
• Intelligent Speed Control
• Reversible Guillotine Blades
• Blanking ONLY Models also Available
• Couple with a Wide Range of SWI Uncoilers & Recoilers

Specifications:

• Maximum Speed: 50m/min (150f/min)
• Length Repeatability: ±1mm (±0.040”)
• Widths Available: 1244mm (49″) & 1500mm (61″)
• Minimum Edge Trim: 5mm (0.197”)
• Minimum Coil Width: 200mm (8”)
• Maximum Batch Lines: 10
• Electrical Supply: 415V/3PH/50-60HZ

Standard Accessories:

• Film Applicator
  • SWI  provides a film applicator that is standard on all slitting/CTL lines. This film application method provides excellent runability and is also easy to adjust. A built-in braking system controls the tension at which the film is applied to the metal.
• Feed Table
  • All SWI slitting/CTL lines come equipped with in-feed tables standard. This table serves two purposes. The first is, when coupled with an SWI uncoiler, the table allows one person to easily load the material into the machine. The second is to provide an area to easily apply the strippable film.