Bleed & Block Valves - 600 & 700 Series from NoShok allow pressure to be bled off without disturbing the permanent piping installation thereby enabling the user to quickly and easily remove and/or replace instruments.
The metal to metal hard seat design is pressure rated to 10,000 psi @ 200 oF and the soft seat design, with a replaceable Delrin seat, is rated to 6000 psi @ 200 oF. The all 316SS blow out proof stem provides greater service life and a secondary stem seal in the full open position.
Stem packing, with the VitonR O-ring and TeflonR back up ring, is below the threads and prevents galling and corrosion. All NoShok valves are 100% Helium leak test to 1 X 10-4 ml/s for guaranteed performance and reliability.
Specifications of Bleed & Block Valves - 600 & 700 Series from NoShok:
Bintech | Level & Flow Instruments, Pressure & Temperature Gauges
Bintech represents 12 international companies. It is dedicated to supplying quality innovative systems using its vast array of manufactured and imported products, most importantly, personal service to its customers.
Bintech was formed by Michael Bindon in 1993 with only one agency and now has over 12 companies at our dispense to combines technical backup with the ability to adapt products to a client’s specific needs. It is recognised as a preferred supplier for level control products to the oil, gas, LPG and diesel industries.
Bintech offers level measurement devices from 7 different suppliers and 5 different technologies. This enables us to provide the best possible solution to a client’s measurement application or problem.
Bintech has designed and manufactured 2 different systems which have gone on to sell in the thousands.
On-site commissioning and telephone assistance as well as workshop repair, servicing and calibration of our instrumentation can be provided.
The provision of technical support and advice to customers, custom built products as well as problem
solving are important features of Bintech’s business.
Bintech prides itself on its personalised service and attention to detail along with a working knowledge of
each client and their particular requirements.