Borum 100000kg Industrial Air/Hydraulic ...

Borum - 100000kg Industrial Air/Hydraulic Press Price Guide: $9,999

Supplier: Transquip Tools Australia

100000kg Industrial Air/Hydraulic Press

This "Borum Industrial" 100,000kg Air Hydraulic Workshop Press is designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening, forming, holding work requires high pressure hydraulics.

In Stock

Polished inner cylinder walls extend the life of the hydraulic seals to minimize abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings.

Features

Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
Foot operated air trigger ram travel control
100mm pressure gauge
Table winch system lowers or raises the bed
High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
Integrated overload protection valve keeps from overloading the system
Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
Paint is oil, grease and dirt-resistant for easy clean up
Extra tall working range for versatility
Pair of bed plates included

Specifications

Safe Working Capacity: 100,000kg
Working Range: 113-813mm
Overall Height: 2048mm
Overall Width: 1199mm
Overall Depth: 990mm
Bed Width: 787mm
Piston Ram Stroke: 300mm
Bed Height Settings: 6
Operating Air Pressure: 110-125psi
Air Inlet: 1/4"NPT
Nett Weight: 652kg
Crate: 1150x380x2044mm
Gross Weight: 762kg

To contact Transquip Tools Australia about Borum 100000kg Industrial Air/Hydraulic Press use Get a quote.

Features

Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
Foot operated air trigger ram travel control
100mm pressure gauge
Table winch system lowers or raises the bed
High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
Integrated overload protection valve keeps from overloading the system
Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
Paint is oil, grease and dirt-resistant for easy clean up
Extra tall working range for versatility
Pair of bed plates included