Budenberg Pneumatic Deadweight Tester | ...

Budenberg - Pneumatic Deadweight Tester | BGP1P

Pneumatic Deadweight Tester | BGP1P

Budenberg Portable Industrial Dead-Weight Tester 15 to 1000 mbar / 1.5 to 100 kPa

In Stock

Budenberg's BGP1P Portable Dead Weight Tester is a fully self contained primary pressure standard. Its ergonomic carry case contains the piston cylinder unit, mass set, pump, indicating gauge and connection hose - everything needed to carry out on-site, high-accuracy pressure calibrations.

The BGP1P has a 1/2in^₂ high chrome steel piston/cylinder unit.The design has been proven over many years to provide excellent sensitivity and stability. Low start pressure is achieved through use of a hollow piston and aluminium head.

NOTE: Model BGP1P can be used on vacuum with a model 24 adaptor for negative gauge pressure calibrations.

Budenberg's Dead-weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates.

Standard accuracy without any corrections for actual area is 0.02% from 100 to 1000 mbar, 0.04% from 15 to 100 mbar. Higher accuracy Class A testers are available (supplied with UKAS Calibration certificates for area and mass) allowing an accuracy of 0.006% to be achieved.

Ranges from 15 to 1000 mbar / 1.5 to 100 kPa
Supplied with integral pressure generation

BGP120 by Budenberg Features

Range: From 15 to 1000 mbar / 1.5 to 100 kPa
Standard Accuracy: To 0.015%
Class ‘A’ Accuracy: To 0.006%
Accessories: Two gauge stand, carry cases,
Piston/Cylinder Unit: 1/2in² high chrome steel
Weights: Austenitic stainless steel

The Budenberg is suitable for the following applications / industries

Oil and Gas
Petrochemical

To contact Aegis Sales & Service about Budenberg Pneumatic Deadweight Tester | BGP1P use Get a quote.

NOTE: Model BGP1P can be used on vacuum with a model 24 adaptor for negative gauge pressure calibrations.

Budenberg's Dead-weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates.

Ranges from 15 to 1000 mbar / 1.5 to 100 kPa
Supplied with integral pressure generation

BGP120 by Budenberg Features

Range: From 15 to 1000 mbar / 1.5 to 100 kPa
Standard Accuracy: To 0.015%
Class ‘A’ Accuracy: To 0.006%
Accessories: Two gauge stand, carry cases,
Piston/Cylinder Unit: 1/2in² high chrome steel
Weights: Austenitic stainless steel

The Budenberg is suitable for the following applications / industries

Oil and Gas
Petrochemical

Read less...

To contact Aegis Sales & Service about Budenberg Pneumatic Deadweight Tester | BGP1P use Get a quote.

Brochure(0.18MB)

AI Overview BETA

The Budenberg BGP1P is a portable pneumatic deadweight tester and primary pressure standard, covering 15 to 1000 mbar. Its carry case contains the piston-cylinder unit, mass set, pump, indicating gauge and connection hose, providing the equipment needed for on-site pressure calibrations. Oil and gas and petrochemical businesses get traceability to national standards through equipment with UKAS calibration certificates.

Class A testers achieve 0.006% accuracy, with UKAS certificates for area and mass
Model 24 adaptor enables vacuum use for negative gauge pressure calibration
Hollow piston and aluminium head provide low start pressure
Austenitic stainless steel weights
Piston-cylinder unit uses high-chrome steel

Source: listing by Aegis Sales & Service on IndustrySearch · Updated 3 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Aegis Sales & Service provide you with a quote