Budenberg Pneumatic Deadweight Testers | ...

Budenberg - Pneumatic Deadweight Testers | BGP1P

Pneumatic Deadweight Testers | BGP1P

Budenberg's BGP1P Portable Dead Weight Tester is a fully self contained primary pressure standard.

10 Recent Views In Stock

BGP1P Pneumatic Deadweight Tester's ergonomic carry case contains the piston cylinder unit, mass set, pump, indicating gauge and connection hose - everything needed to carry out on-site, high-accuracy pressure calibrations.

The BGP1P has a 1/2in^₂ high chrome steel piston/cylinder unit.The design has been proven over many years to provide excellent sensitivity and stability. Low start pressure is achieved through use of a hollow piston and aluminium head.

NOTE: Model BGP1P can be used on vacuum with a model 24 adaptor for negative gauge pressure calibrations.

Budenberg's Dead-weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates.

Standard accuracy without any corrections for actual area is 0.02% from 100 to 1000 mbar, 0.04% from 15 to 100 mbar. Higher accuracy Class A testers are available (supplied with UKAS Calibration certificates for area and mass) allowing an accuracy of 0.006% to be achieved.

Ranges from 15 to 1000 mbar / 1.5 to 100 kPa
Supplied with integral pressure generation

BGP120 by Budenberg Features

Range: From 15 to 1000 mbar / 1.5 to 100 kPa
Standard Accuracy: To 0.015%
Class ‘A’ Accuracy: To 0.006%
Accessories: Two gauge stand, carry cases,
Piston/Cylinder Unit: 1/2in² high chrome steel
Weights: Austenitic stainless steel

To contact Procon Instrument Technology about Budenberg Pneumatic Deadweight Testers | BGP1P use Get a quote.

NOTE: Model BGP1P can be used on vacuum with a model 24 adaptor for negative gauge pressure calibrations.

Budenberg's Dead-weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates.

Ranges from 15 to 1000 mbar / 1.5 to 100 kPa
Supplied with integral pressure generation

BGP120 by Budenberg Features

Range: From 15 to 1000 mbar / 1.5 to 100 kPa
Standard Accuracy: To 0.015%
Class ‘A’ Accuracy: To 0.006%
Accessories: Two gauge stand, carry cases,
Piston/Cylinder Unit: 1/2in² high chrome steel
Weights: Austenitic stainless steel

Read less...

To contact Procon Instrument Technology about Budenberg Pneumatic Deadweight Testers | BGP1P use Get a quote.

For more information on the BGP1P Dead Weight Tester(0.18MB)

For more information on optional accessories(0.31MB)

AI Overview BETA

The Budenberg BGP1P is a portable pneumatic deadweight tester that serves as a primary standard for pressure measurement. Its carry case packs the pump, mass set, connection hose, indicating gauge and piston-cylinder unit, keeping the calibration gear together for transport between sites. For on-site pressure calibration jobs, its operating range spans 15 to 1000 mbar.

Available Class A testers: 0.006% accuracy; UKAS certificates for area and mass
Traceable to national standards through equipment with UKAS calibration certificates
Model 24 adaptor supports vacuum use for negative gauge pressure calibrations
Hollow piston and aluminium head provide low start pressure
Integral pressure generation included

Source: listing by Procon Instrument Technology on IndustrySearch · Updated 3 Nov 2026
Supplier document: For more information on the BGP1P Dead Weight Tester (PDF)

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Procon Instrument Technology provide you with a quote