Access Instrumentation Alarm Monitor | ...

Access Instrumentation - Alarm Monitor | 5000 Series

Alarm Monitor | 5000 Series

The 5000 series Alam Monitor from is a highly versatile process condition monitor that utilises the latest in microprocessor technology, this monitor offers the end-user unlimited options for monitoring, recording and reporting on all categories.

In Stock

Capable of simultaneous readings of up to 24 analogue process signals the 5000 Alarm Monitor will accept signals from a wide expanse sensors and compare the measured value with pre-set alarm levels. If an alarm level is exceeded, the unit provides visual indication and relay closures, which can be used for alarm and shutdown functions.

The microprocessor technology is used to provide simultaneous measurement of all inputs that will carry out extensive internal self-checking procedures. When a fault is detected it will be indicated via the display and relay contact closure. This alarm monitor has been designed for simple quick configuration and is equipped to handle most process signal types from mA and mV to RTD and Thermocouples with software selectable scaling and linerisations.

Each channel is equipped with software strategies for Alarming and Logging providing the user with an array of possibilities for process monitoring. The dual channel I/O cards are built on the proven 1000PLUS platform and feature high quality analogue components giving the best accuracy and thermal stability. The system is available in 6 Channel 12 Channel and 24 Channel base configurations

The 5000 series alarm monitor was designed to replace the now obsolete Thermo – Rosemount 4000, 4001, 4002 & 4400 alarm monitors.

Applications: Temperature monitoring / Vibration monitoring / Pressure monitoring / Flow monitoring and Pump Performance monitoring.

5000 Series Alarm Monitor features:

6, 12 and 24 Channel DIN Enclosure with 2 part screw terminal connections to the rear.
Channel cards may be added at any time by the user, these are available in a Dual Channel format.
Each Channel has a dedicated microprocessor for high speed data acquisition.
Universal analogue inputs supporting many industrial process signal types with high accuracy / thermal stability electronics and high performance 24 bit ADC.
User configurable ‘soft’ input scaling and linearization, alarm & event triggers and data logging.
2 off Global State Relay alarm outputs as standard.
Optional Channel Dual Alarm outputs with independent set-points and triggering strategies, including; High, Low, Rate of Change and Early Indication.
Optional Channel Analogue Output repeat facility with user defined rescaling.
3.8” LCD HMI with colour touch-screen interface for Channel card monitoring, local interrogation, alarm acknowledgement and system configuration.
High speed robust and reliable MODBUS backbone between Channel cards and HMI.
Simple setup via intuitive configuration screens on HMI.
Communications available for 2 wire RS485 (MODBUS RTU/JBUS) allowing 5000 units to be networked and/or interfaced to DCS & SCADA systems.

To contact Procon Instrument Technology about Access Instrumentation Alarm Monitor | 5000 Series use Get a quote.

The 5000 series alarm monitor was designed to replace the now obsolete Thermo – Rosemount 4000, 4001, 4002 & 4400 alarm monitors.

Applications: Temperature monitoring / Vibration monitoring / Pressure monitoring / Flow monitoring and Pump Performance monitoring.

5000 Series Alarm Monitor features:

6, 12 and 24 Channel DIN Enclosure with 2 part screw terminal connections to the rear.
Channel cards may be added at any time by the user, these are available in a Dual Channel format.
Each Channel has a dedicated microprocessor for high speed data acquisition.
Universal analogue inputs supporting many industrial process signal types with high accuracy / thermal stability electronics and high performance 24 bit ADC.
User configurable ‘soft’ input scaling and linearization, alarm & event triggers and data logging.
2 off Global State Relay alarm outputs as standard.
Optional Channel Dual Alarm outputs with independent set-points and triggering strategies, including; High, Low, Rate of Change and Early Indication.
Optional Channel Analogue Output repeat facility with user defined rescaling.
3.8” LCD HMI with colour touch-screen interface for Channel card monitoring, local interrogation, alarm acknowledgement and system configuration.
High speed robust and reliable MODBUS backbone between Channel cards and HMI.
Simple setup via intuitive configuration screens on HMI.
Communications available for 2 wire RS485 (MODBUS RTU/JBUS) allowing 5000 units to be networked and/or interfaced to DCS & SCADA systems.