GPI Flow Meters | FLomec QSE Mag Series

GPI - Flow Meters | FLomec QSE Mag Series

Flow Meters | FLomec QSE Mag Series

For measurements of all types of conductive liquids. The FLomec QSE Mag Series is a dependable highly accurate electromagnetic flowmeter designed for flow and usage monitoring in commercial applications.

15 Recent Views In Stock

The Noryl housing and flow tube offer a lightweight, easy-to-install Mag Meter that is resistant to heat (210°F [99°C]) and compatible with many water-based liquid solutions.

These QSE Mag Meters monitor flow rate and total flow in a wide variety of applications including: HVAC, Turf/ Irrigation and other water reclamation applications.

Suitable Applications

Agricultural Irrigation, Turf Irrigation Systems, Micro Irrigation Systems, EMS (Energy Managment Systems), BAS (Building Automation Systems), Chilled Water, Domestic Water (hot & cold), Energy sub-metering (BTU hot and cold), Process (blow down, make up, boiler feed etc...)

Features & Benefits of the Flomec QSE Flow Meter

Low investment and operating costs
± 0.5% Accuracy of Reading (from 0.25 fps to 15 fps [0.08 to 4.6 m/s])
Wide turndown ratio of 60:1
Non-intrusive, no moving parts to wear out, maintenance, repair costs low and tolerates high flows without damage
The slightly modified bore permits unobstructed flow and minimizes flow disturbances and straight pipe requirements
7 line sizes (1/2” to 4”) ½”, ¾”, 1”, 1-1/2”, 2”, 3″, & 4”
Housing ported with “Thermal Well Supports” for sensors (Energy Management)
Compatible with FLOMEC® 09 Electronics Display or QSI I/O Board

To contact Procon Instrument Technology about GPI Flow Meters | FLomec QSE Mag Series use Get a quote.

The Noryl housing and flow tube offer a lightweight, easy-to-install Mag Meter that is resistant to heat (210°F [99°C]) and compatible with many water-based liquid solutions.

These QSE Mag Meters monitor flow rate and total flow in a wide variety of applications including: HVAC, Turf/ Irrigation and other water reclamation applications.

Suitable Applications

Features & Benefits of the Flomec QSE Flow Meter

Low investment and operating costs
± 0.5% Accuracy of Reading (from 0.25 fps to 15 fps [0.08 to 4.6 m/s])
Wide turndown ratio of 60:1
Non-intrusive, no moving parts to wear out, maintenance, repair costs low and tolerates high flows without damage
The slightly modified bore permits unobstructed flow and minimizes flow disturbances and straight pipe requirements
7 line sizes (1/2” to 4”) ½”, ¾”, 1”, 1-1/2”, 2”, 3″, & 4”
Housing ported with “Thermal Well Supports” for sensors (Energy Management)
Compatible with FLOMEC® 09 Electronics Display or QSI I/O Board

Read less...

To contact Procon Instrument Technology about GPI Flow Meters | FLomec QSE Mag Series use Get a quote.