The Campbell Scientific Barometric Pressure Sensor CS100 measures barometric pressure for the range of 600 to 1100 mb. This range equates to from below sea level (as in a mine) up to 12,000 feet above sea level.
The CS100 is a Campbell Scientific version of Setra's model 278 barometer. It uses Setra’s SetraceramTM capacitive sensor and IC analog circuit to measure barometric pressure.
The CS100 is encased in a stainless steel and polyester case fitted with an 1/8 in. barbed fitting for pressure connection. It includes an internal switching circuit that allows the datalogger to power the barometer only during measurement, which reduces power consumption.
NB: The cable shown attached to the sensor is optional, in Europe and if required can be ordered as a length of CABLE5CBL-L.
Benefits and Features
Optimized to mount in Campbell Scientific enclosures
Low power consumption
500 to 1100 hPa (mBar) and 800 to 1100 hPa (mBar) versions also available by special order—contact Campbell Scientific
Integral switching circuit limits power consumption to measurement cycle
Pressure Range: 600 to 1100 hPa
Long-Term Stability: ±0.1 hPa per year
Response Time: < 100 ms
Resolution: ±0.01 hPa
Operating Temperature Range:-40° to +60°C
Cable Diameter: 0.8 cm (0.3 in.)
Cable Length: 0.8 m (2.5 ft)
Dimensions: 9.1 x 6.1 x 2.5 cm (3.6 x 2.4 x 1.0 in.)
Weight:135 g (4.8 oz)
Campbell Scientific Australia | Data Acquisition, Data Loggers & Weather Monitoring
Campbell Scientific Australia - Leaders in Environmental & Industrial Monitoring
Campbell Scientific Australia supplies a complete range of data acquisition systems, data loggers, sensors, peripherals ...