TMC is the leading Australian manufacturer of cast resin motor starting transformers. TMC produces cast resin motor starting transformers to suit all motor capacities.
Motor Starting Transformer Characteristics
Motor starting transformers are auto transformers with tappings in the range of 50% to 70% of rated voltage (customer specified).
The motor to be started is switched through the auto transformer in such a way as to start the motor at a lower voltage to minimise starting load and the associated supply voltage drop. This method is often referred to as the "Korndorfer Starter".
The transformers can be supplied in enclosures to various degrees of protection, or open (un-enclosed) if preferred. Enclosure ratings of IP21 to IP33 are common and protection up to IP66 is also available for extreme conditions and flameproof applications.
Enclosures are fitted with sealed marshalling boxes fitted with temperature and performance monitoring equipment. Enclosures can be fitted with interlocked doors to provide additional safety.
TMC cast resin transformers can be supplied with fans and controls to increase the rated capacity (kVA). Forced directed air circulation permits a continuous power increase of up to 35% above the rated capacity.
Fans can be used to economically provide extra capacity for overload conditions such as cyclic load peaks and traction loads.
Information Required with Enquiry:
Voltages (at no-load)
Voltage tapping range.
Number of Phases (normally 3)
Motor locked-rotor current
Motor start duration (seconds)
Number of starts per hour
Enclosure Protection Rating
Temperature Sensing Equipment
Current Sensing Equipment (CT's).
To Know More about Cast Resin Transformers For Motor Starting Please click here
TMC Australia | Transformer Design & Manufacture
TMC has been a leading enterprise in the field of transformer design and manufacture since 1937.
A wholly owned Australian company with its head office in Victoria, TMC excels at providing high ...