CEJN Filter Regulator Model 652

CEJN - Filter Regulator Model 652

Supplier: CEJN Australia

Filter Regulator Model 652

1/2

Filter Regulator Model 652

In Stock

Filter Regulator Model 652

High flow capacity at low pressure drop
Easy replacement of filter element
Provides constant output pressure

For optimal performance, Model 652 combines a filter, regulator and flat gauge in one product. The filter will remove any moisture or debris and the regulator provides a controlled and consistent air pressure. Thanks to its compact design, it is a good alternative in applications where space is limited. Model 652, piggyback, manages compressed air systems operating up to 16 bar (232 PSI) inlet pressure. The model features a polycarbonate bowl, easily visible level indicators, locking device and for extended lifetime, a flexible rolling diaphragm. Application: Virtually every industry, e.g. manufacturing, food, processing, carpentry, paper mills, etc., relies on compressed air as an energy source. In a shared compressed air network, with numerous outlets and an extensive pipework system, air preparation units are especially important.

For smaller and larger sizes refer to Model 651 and Model 653. Additional air treatment products are available in our air treatment range including preassembled units.

Technical Data

Media:	Compressed air, neutral gas
Max. working pressure @ 23°C:	16 bar (232 PSI)
Temperature range:	-20°C — +50°C (-4°F — +122°F)
Filtering element:	Sintered polyethylene
Material body:	Aluminium
Material bowl:	Polycarbonate
Condensate drain:	Semi-automatic
Controlled pressure:	0.5-10 bar (7-145 PSI)
Hysterisis:	0.3 bar (4 PSI)
Material seal:	Nitrile

Flow capacity is measured at 6.3 bar (91.4 PSI) inlet pressure, and pressure drop at 1 bar (14.5 PSI).

Article Data

Part No.	A	B	C	D	E	F	G	H	I	K
19 503 5404	273	66	94.5	253.5	G 1/8"	G 1/8"	73	69	30.5	G 3/8"

19 503 5414	273	66	94.5	253.5	G 1/8"	G 1/8"	73	69	30.5	G 3/8"

19 503 5405	273	66	94.5	253.5	G 1/8"	G 1/8"	73	69	30.5	G 1/2"

19 503 5415	273	66	94.5	253.5	G 1/8"	G 1/8"	73	69	30.5	G 1/2"

Filter/Regulators	Part No.	Connection	Bowl capacity	Filtration	Controlled pressure	Max flow
	19 503 5404	G 3/8"	11 cl	25 µm	0.5 - 10 bar (7-145 PSI)	5420 l/min (191.3 CFM)

	19 503 5414	G 3/8"	11 cl	5 µm	0.5 - 10 bar (7-145 PSI)	4450 l/min (157.1 CFM)

	19 503 5405	G 1/2"	11 cl	25 µm	0.5 - 10 bar (7-145 PSI)	5500 l/min (194.2 CFM)

	19 503 5415	G 1/2"	11 cl	5 µm	0.5 - 10 bar (7-145 PSI)	4490 l/min (158.5 CFM)

Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part numbers may be subject to minimum order quantities. CEJN reserves the right to make changes without further notification. Thread connections are listed according to ISO Standards.

To contact CEJN Australia about CEJN Filter Regulator Model 652 use Get a quote.

Filter Regulator Model 652

High flow capacity at low pressure drop
Easy replacement of filter element
Provides constant output pressure

For smaller and larger sizes refer to Model 651 and Model 653. Additional air treatment products are available in our air treatment range including preassembled units.

Technical Data

Media:	Compressed air, neutral gas
Max. working pressure @ 23°C:	16 bar (232 PSI)
Temperature range:	-20°C — +50°C (-4°F — +122°F)
Filtering element:	Sintered polyethylene
Material body:	Aluminium
Material bowl:	Polycarbonate
Condensate drain:	Semi-automatic
Controlled pressure:	0.5-10 bar (7-145 PSI)
Hysterisis:	0.3 bar (4 PSI)
Material seal:	Nitrile

Flow capacity is measured at 6.3 bar (91.4 PSI) inlet pressure, and pressure drop at 1 bar (14.5 PSI).

Article Data

Part No.	A	B	C	D	E	F	G	H	I	K
19 503 5404	273	66	94.5	253.5	G 1/8"	G 1/8"	73	69	30.5	G 3/8"

19 503 5414	273	66	94.5	253.5	G 1/8"	G 1/8"	73	69	30.5	G 3/8"

19 503 5405	273	66	94.5	253.5	G 1/8"	G 1/8"	73	69	30.5	G 1/2"

19 503 5415	273	66	94.5	253.5	G 1/8"	G 1/8"	73	69	30.5	G 1/2"

Filter/Regulators	Part No.	Connection	Bowl capacity	Filtration	Controlled pressure	Max flow
	19 503 5404	G 3/8"	11 cl	25 µm	0.5 - 10 bar (7-145 PSI)	5420 l/min (191.3 CFM)

	19 503 5414	G 3/8"	11 cl	5 µm	0.5 - 10 bar (7-145 PSI)	4450 l/min (157.1 CFM)

	19 503 5405	G 1/2"	11 cl	25 µm	0.5 - 10 bar (7-145 PSI)	5500 l/min (194.2 CFM)

	19 503 5415	G 1/2"	11 cl	5 µm	0.5 - 10 bar (7-145 PSI)	4490 l/min (158.5 CFM)

Read less...

To contact CEJN Australia about CEJN Filter Regulator Model 652 use Get a quote.

AI Overview BETA

The CEJN Model 652 is a compressed-air filter regulator that removes moisture and debris while delivering controlled outlet pressure. Its compact design particularly suits installations where space is limited. Manufacturing, food processing, carpentry and paper-mill operations use it to prepare air for shared compressed-air networks, where multiple outlets and extensive pipework make air-treatment units especially important.

Maximum working pressure: 16 bar at 23°C
Controlled pressure range: 0.5–10 bar
Maximum flow ranges from 4,450 to 5,500 l/min across versions
Filtration options: 5 µm or 25 µm sintered polyethylene
G 3/8" and G 1/2" connections, each with an 11 cl bowl

Source: listing by CEJN Australia on IndustrySearch · Updated 5 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let CEJN Australia provide you with a quote