CNC Contour Cutter | Compuset
CNC Contour Cutter | Compuset
A sophisticated machine that loads and positions multiple wires automatically
Fixed Table
The cutting frame moves along a fixed table, which is built in a range of sizes. Compact sizes are ideal for small spaces, while broader sizes can increase productivity by cutting two or more blocks at a time.
Manual Tilt Adjustment
When sheeting a block of foam, the cutting frame can be manually tilted to ensure a clean cut when the wires exit the block. The software compensates for the angle of tilt to produce accurate thickness of each sheet.
Automatic Wire Loading & Positioning
The standard Compuset is fitted with 20 computer controlled wires, which can be attached and stored out of the way until needed. Any number of wires can then be automatically loaded, positioned and unloaded by the computer for a given job. An upgrade to 40 wires is also available.
Integrated Blower System
This feature circulates the air alongside the cutting hotwire, in effect cooling the area around the wire. This prevent overheating which could otherwise break the wire or damage the block edge.
Compatible with a Selection of Wires
Two different wire sizes have been tested for compatibility and performance with this model.
Popular Uses
- Custom Contours - Cut custom shapes with computer-controlled accuracy, to ensure quick and quality results every time.
- Sheeting - This model can hold multiple cutting wires, allowing a block of foam to be sliced into multiple sheets in a single pass. The wires can be spaced to create sheets of equal or varying thickness.
- Packaging & Insulation - This machine thrives in workflows focused on productivity. It can go from turning out stacks of sheets to cutting nested custom contours in high volumes easily and quickly. It is a favourite in companies dealing with packaging and insulation.
Specifications: Model: CS-2550
- Dimensions
- Machine: 3140 × 6600 × 2600 mm
- Control Cabinet: 1600 × 450 × 1150 mm
- Capacity
- Foam Type(s): Designed to cut polystyrene
- Cutting Volume: 2500 × 5000 × 1250 mm
- Configurations
- Included
- Hotwire Gripper Kit (20, 30 or 40 wires)
- Optional
- Block Detection
- Fastwire Attachment
- Pneumatic Tilt
- Powered Turntable
- Included
- Accessories
- Included
- Control Cabinet
- Profiler Software
- Remote Operator Handset
- Optional
- Air Freight Kit
- AutoNEST Software
- Chain Table
- Digitiser
- Fence Barriers
- Light Curtains
- Skid
- Included
- Factory Footprint
- Floor Plan
- Recommended 2000 mm clearance area for service and loading/unloading.
- Safety Barriers
- Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains.
- We encourage customers to investigate the safety regulations established by their country, district or workplace.
- Specifications
- Voltage: 3 phase and earth
- Wire Voltage: 30 ~ 140 VAC
Microprocessor controlled - AC Power: Standard builds are 380–420v +/- 10%
Customer specified on order - Frequency: 50 or 60 HZ +/- 1%
- Operating Conditions
- Temperature
- 0–35° Celsius
- 32–90° Fahrenheit
- Humidity
- Maximum of 80% non-condensing
- Temperature
- Floor Plan
To contact Wintech Engineering about CNC Contour Cutter | Compuset use Get a quote.
Fixed Table
The cutting frame moves along a fixed table, which is built in a range of sizes. Compact sizes are ideal for small spaces, while broader sizes can increase productivity by cutting two or more blocks at a time.
Manual Tilt Adjustment
When sheeting a block of foam, the cutting frame can be manually tilted to ensure a clean cut when the wires exit the block. The software compensates for the angle of tilt to produce accurate thickness of each sheet.
Automatic Wire Loading & Positioning
The standard Compuset is fitted with 20 computer controlled wires, which can be attached and stored out of the way until needed. Any number of wires can then be automatically loaded, positioned and unloaded by the computer for a given job. An upgrade to 40 wires is also available.
Integrated Blower System
This feature circulates the air alongside the cutting hotwire, in effect cooling the area around the wire. This prevent overheating which could otherwise break the wire or damage the block edge.
Compatible with a Selection of Wires
Two different wire sizes have been tested for compatibility and performance with this model.
Popular Uses
- Custom Contours - Cut custom shapes with computer-controlled accuracy, to ensure quick and quality results every time.
- Sheeting - This model can hold multiple cutting wires, allowing a block of foam to be sliced into multiple sheets in a single pass. The wires can be spaced to create sheets of equal or varying thickness.
- Packaging & Insulation - This machine thrives in workflows focused on productivity. It can go from turning out stacks of sheets to cutting nested custom contours in high volumes easily and quickly. It is a favourite in companies dealing with packaging and insulation.
Specifications: Model: CS-2550
- Dimensions
- Machine: 3140 × 6600 × 2600 mm
- Control Cabinet: 1600 × 450 × 1150 mm
- Capacity
- Foam Type(s): Designed to cut polystyrene
- Cutting Volume: 2500 × 5000 × 1250 mm
- Configurations
- Included
- Hotwire Gripper Kit (20, 30 or 40 wires)
- Optional
- Block Detection
- Fastwire Attachment
- Pneumatic Tilt
- Powered Turntable
- Included
- Accessories
- Included
- Control Cabinet
- Profiler Software
- Remote Operator Handset
- Optional
- Air Freight Kit
- AutoNEST Software
- Chain Table
- Digitiser
- Fence Barriers
- Light Curtains
- Skid
- Included
- Factory Footprint
- Floor Plan
- Recommended 2000 mm clearance area for service and loading/unloading.
- Safety Barriers
- Suggested clearance for a fence is 1000 mm (40 inches), or 2500 mm (100 inches) for light curtains.
- We encourage customers to investigate the safety regulations established by their country, district or workplace.
- Specifications
- Voltage: 3 phase and earth
- Wire Voltage: 30 ~ 140 VAC
Microprocessor controlled - AC Power: Standard builds are 380–420v +/- 10%
Customer specified on order - Frequency: 50 or 60 HZ +/- 1%
- Operating Conditions
- Temperature
- 0–35° Celsius
- 32–90° Fahrenheit
- Humidity
- Maximum of 80% non-condensing
- Temperature
- Floor Plan
To contact Wintech Engineering about CNC Contour Cutter | Compuset use Get a quote.
The Compuset CS-2550 is a CNC foam cutter that cuts polystyrene blocks into shaped contours or sheets using hotwires. Computer control automatically loads, positions and unloads the selected wires for each job, using the standard 20-wire setup. Packaging and insulation producers can choose a broader fixed table to cut multiple blocks at once and increase output.
- Upgrade to 40 wires available
- Cutting volume: 2500 x 5000 x 1250 mm
- Manual frame tilt; software compensates to maintain accurate sheet thickness
- Integrated blower circulates air beside the hotwire to cool the cutting area
- Standard AC supply: 380–420 V ±10%; customer-specified on order, 3-phase and earth
Source: listing by Wintech Engineering on IndustrySearch · Updated 6 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Wintech Engineering on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
HCM-S Plus Hot Wire Foam Cutter
HCM2S Hot Wire Foam Cutter
CNC Hotwire Foam Cutting Machine | Cream 200
CNC Hotwire Foam Cutting Machine | 300C / 300C plus
CNC Hotwire Foam Cutting Machine | Infinity
Professional CNC Hot Wire Foam Cutting Machine
Hotwire Manual Cutter | TM Slim
Hotwire Foam Cutter TM Line
CNC Hotwire Foam Cutter | Plot 250
AZTC20 Compact Thermocutter Hot Knife Cutter
CNC Contour Cutter | Fastwire with Hotwire Attachment
CNC Contour Cutter | Fastwire with Compuset Head
CNC Contour Cutter | Hotwire
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales