CNC Contour Cutter | Hotwire for sale from Wintech Engineering

CNC Contour Cutter | Hotwire

Supplier: Wintech Engineering

CNC Contour Cutter | Hotwire

A solid introduction to automated cutting

38 Recent Views In Stock

Manual Tilt Adjustment

When sheeting a block of foam, the cutting frame can be manually tilted to ensure a clean cut when the wires exit the block. The software compensates for the angle of tilt to produce accurate thickness of each sheet.

Fixed Table

The cutting frame moves along a fixed table, which is built in a range of sizes. Compact sizes are ideal for small spaces, while broader sizes can increase productivity by cutting two or more blocks at a time.

Compatible with a Selection of Wires

Two different wire sizes have been tested for compatibility and performance with this model.

Popular Uses

Custom Contours - Cut custom shapes with computer-controlled accuracy, to ensure quick and quality results every time.
Sheeting - This model can hold multiple cutting wires, allowing a block of foam to be sliced into multiple sheets in a single pass. The wires can be spaced to create sheets of equal or varying thickness.
Stage, Craft & Themework - This is a great entry-level machine for craftsman looking to automate aspects of their production. It can be used to cut intricate designs created on the computer or in conjunction with a hand-held hotwire tool that carves finishing touches from a base shape.

Specifications: Model: HW-2550

Dimensions
- Machine: 3000 × 6600 × 2520 mm
- Control Cabinet: 1600 × 450 × 1150 mm
Capacity
- Foam Types: Designed to cut polystyrene
- Cutting Volume: 2500 × 5000 × 1250 mm
Configurations
- Optional
  - Block Detection
  - Powered Turntable
Accessories
- Included
  - Control Cabinet
  - Profiler Software
  - Remote Operator Handset
- Optional
  - Air Freight Kit
  - AutoNEST Software
  - Chain Table
  - Digitiser
  - Fence Barriers
  - Light Curtains
  - Skid
Factory Footprint
- Floor Plan
  - Recommended 2000 mm clearance area for service and loading/unloading.
- Safety Barriers
  - Suggested clearance for a fence or light curtains is 1000 mm (40 inches).
  - We encourage customers to investigate the safety regulations established by their country, district or workplace.
Specifications
- Voltage: 3 phase and earth
- Wire Voltage: 30 ~ 140 VAC Microprocessor controlled.
- AC Power: Standard builds are 380–420v +/- 10% Customer specified on order.
- Frequency: 50 or 60 HZ +/- 1%
Operating Conditions
- Temperature
  - 0–35° Celsius
  - 32–90° Fahrenheit
- Humidity
  - Maximum of 80% non-condensing

To contact Wintech Engineering about CNC Contour Cutter | Hotwire use Get a quote.

Manual Tilt Adjustment

Fixed Table

Compatible with a Selection of Wires

Two different wire sizes have been tested for compatibility and performance with this model.

Popular Uses

Custom Contours - Cut custom shapes with computer-controlled accuracy, to ensure quick and quality results every time.
Sheeting - This model can hold multiple cutting wires, allowing a block of foam to be sliced into multiple sheets in a single pass. The wires can be spaced to create sheets of equal or varying thickness.
Stage, Craft & Themework - This is a great entry-level machine for craftsman looking to automate aspects of their production. It can be used to cut intricate designs created on the computer or in conjunction with a hand-held hotwire tool that carves finishing touches from a base shape.

Specifications: Model: HW-2550

Dimensions
- Machine: 3000 × 6600 × 2520 mm
- Control Cabinet: 1600 × 450 × 1150 mm
Capacity
- Foam Types: Designed to cut polystyrene
- Cutting Volume: 2500 × 5000 × 1250 mm
Configurations
- Optional
  - Block Detection
  - Powered Turntable
Accessories
- Included
  - Control Cabinet
  - Profiler Software
  - Remote Operator Handset
- Optional
  - Air Freight Kit
  - AutoNEST Software
  - Chain Table
  - Digitiser
  - Fence Barriers
  - Light Curtains
  - Skid
Factory Footprint
- Floor Plan
  - Recommended 2000 mm clearance area for service and loading/unloading.
- Safety Barriers
  - Suggested clearance for a fence or light curtains is 1000 mm (40 inches).
  - We encourage customers to investigate the safety regulations established by their country, district or workplace.
Specifications
- Voltage: 3 phase and earth
- Wire Voltage: 30 ~ 140 VAC Microprocessor controlled.
- AC Power: Standard builds are 380–420v +/- 10% Customer specified on order.
- Frequency: 50 or 60 HZ +/- 1%
Operating Conditions
- Temperature
  - 0–35° Celsius
  - 32–90° Fahrenheit
- Humidity
  - Maximum of 80% non-condensing

Read less...

To contact Wintech Engineering about CNC Contour Cutter | Hotwire use Get a quote.

AI Overview BETA

The HW-2550 is a computer-controlled hotwire foam cutter that shapes custom contours and slices polystyrene blocks. Its software compensates for a manually tilted cutting frame, maintaining accurate sheet thickness as the wires leave the foam block. For stage, craft and themework production, it cuts intricate designs created on a computer, automating part of the work.

Cutting volume: 2500 × 5000 × 1250 mm
Machine dimensions: 3000 × 6600 × 2520 mm
Includes control cabinet, Profiler Software and remote operator handset
Optional block detection, powered turntable, AutoNEST Software, digitiser and light curtains
Standard-build power: 380–420 V +/- 10%, customer-specified on order; 3-phase and earth

Source: listing by Wintech Engineering on IndustrySearch · Updated 3 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Wintech Engineering provide you with a quote