Crucible Furnaces
Crucible Furnaces
Furnace Engineering supplies Crucible Furnaces for melting and holding of light metals (e.g. Aluminium, Zinc, Magnesium)
Key Features
- The range starts from a small 1 litre bench top furnace up to the large 400 litre capacity furnace.
- The furnace can electrically heated, gas or oil fired.
- The furnace heats around the crucible to ensure good temperature uniformity of the melt.
- The high grade insulation in the furnace results in low casing temperature, energy efficiency and long life.
- The furnace floor is sloped to an emergency run-out port minimising damage to the furnace in the event of crucible damage.
- Temperature control system monitors both the chamber and melt to prevent thermal cycling.
To contact Furnace Engineering Pty Ltd about Crucible Furnaces use Get a quote.
Key Features
- The range starts from a small 1 litre bench top furnace up to the large 400 litre capacity furnace.
- The furnace can electrically heated, gas or oil fired.
- The furnace heats around the crucible to ensure good temperature uniformity of the melt.
- The high grade insulation in the furnace results in low casing temperature, energy efficiency and long life.
- The furnace floor is sloped to an emergency run-out port minimising damage to the furnace in the event of crucible damage.
- Temperature control system monitors both the chamber and melt to prevent thermal cycling.
To contact Furnace Engineering Pty Ltd about Crucible Furnaces use Get a quote.
Furnace Engineering’s crucible furnace range is designed to melt and hold light metals, including aluminium, zinc and magnesium. The furnace’s temperature control system monitors both the chamber and melt to prevent thermal cycling during normal operation. Buyers can select electric heating, gas firing or oil firing as the heat source for their own furnace operation.
- Capacities run from a 1 litre bench-top furnace to a 400 litre unit
- Heating around the crucible promotes even temperature across the melt
- High-grade insulation lowers casing temperature and supports energy efficiency and long furnace life
- Sloped floor and emergency run-out port minimise damage if the crucible is damaged
Source: listing by Furnace Engineering Pty Ltd on IndustrySearch · Updated 30 Oct 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Furnace Engineering Pty Ltd on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Induction Heaters | 70KW Low-Frequency Induction Melting Furnace
Induction Furnaces | Charging Systems
Reverberatory Furnaces
Tilting Crucible Furnaces
Bale Out Crucible Melting Furnaces
Barrel Melting Furnaces
Induction Furnaces
Smelting Furnaces
Two Chamber Vertical Induction Skull Melting Furnace
Two Chamber Horizontal Induction Skull Melting Furnace
Single Chamber Induction Skull Melting Furnace
Tandem Chamber Induction Skull Melting Furnace
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales