Environmental Test Chamber | EHRFF-RH ...
Environmental Test Chamber | EHRFF-RH Series
Steridium -40C freezing, high temperature and humidity test chambers are used for a wide range of soak and cycling tests - for a variety of applications, from electronic pc boards, to pharmacuetical and food shelf life tests.
The ehrff series test chamber offers precision temperature and humidity control from -40 to 200C, 20-90%RH with specific ramp rates are acheivable to meet industry specific requirements.
The chambers' standard humidity envelope can be extended to by adding ultra low and ultra high humidity options - from 10 to 95%RH
Features of this product
- -40 to 200C
- 170 to 2400L chamber capacities
- 20-90% RH
- automatic cycling of temperature and humidity
- side cable access port for monitoring of device under test
To contact Steridium about Environmental Test Chamber | EHRFF-RH Series use Get a quote.
The ehrff series test chamber offers precision temperature and humidity control from -40 to 200C, 20-90%RH with specific ramp rates are acheivable to meet industry specific requirements.
The chambers' standard humidity envelope can be extended to by adding ultra low and ultra high humidity options - from 10 to 95%RH
Features of this product
- -40 to 200C
- 170 to 2400L chamber capacities
- 20-90% RH
- automatic cycling of temperature and humidity
- side cable access port for monitoring of device under test
To contact Steridium about Environmental Test Chamber | EHRFF-RH Series use Get a quote.
Steridium EHRFF-RH Series environmental test chambers control temperature and humidity for soak and cycling tests, with chamber capacities from 170 to 2,400 L. Automatic cycling changes temperature and humidity during a test, allowing the chamber to run both conditions as part of the same cycle. Electronics, pharmaceutical and food testing teams use the chambers for electronic PC board tests and shelf-life assessments.
- Temperature range: -40 to 200°C
- Standard humidity range: 20–90% RH
- Optional ultra-low and ultra-high humidity extend the range to 10–95% RH
- Specific ramp rates are achievable for industry-specific requirements
- Side cable access port for monitoring the device under test
Source: listing by Steridium on IndustrySearch · Updated 3 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Steridium on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Environmental Test Chamber Testing room (volume) 22 L | Benchtop Temp
-280x280-state_7.jpg)
Environmental Test Chamber Capacity 64L-1000 | Floor Standing Climate
-280x280-state_7.jpg)
Environmental Test Chamber Volume 50L – 1000 | Thermal Shock Chamber
Environmental Test Chamber Volume 8m³ to 24m³ | Walk-in Climate
Environmental Test Chamber Volume 500L – 2000L | Sand Dust
Environmental Test Chamber 6 KW | Xenon
Test & Measurement | Salt Fog Chamber
Environmental Test Chambers | HALT and HASS Test Systems - CSZ
Test & Measurement | Benchtop Test Chamber - MicroClimate
Humidity Chambers - Temperature Humidity Environmental Test Chambers
Bench-top Climatic Chambers - Humidity Chambers
Salt Spray Test Chamber
High Temperature Pressure Jet Waterproof Test Chamber | IPX9K
Test & Measurement | Temperature Humidity Vibration Test Chamber
Test & Measurement | Immersion Test Tank Systems
Climate Test Chambers | ClimeEvent
Temperature Test Chambers | TempEvent
Cyclic Corrosion Test Chamber
Climate Chamber Solar Simulator PV Testing - Eternal Sun
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales