Festo Quarter-Turn Actuator DFPD
Festo - Quarter-Turn Actuator DFPD
The perfect all-rounder: the highly modular DFPD provides a wide range of quarter turn actuators. Suitable for the majority of tasks in the process industry, such as for automating butterfly valves, ball valves and air dampers.
Highlights
- NAMUR interface to VDI/VDE 3845
- Mounting plate for pilot valves in G and NPT thread versions
- End position adjustable at both ends
- Suitable for extreme temperatures: -50 … +150 °C
- Sizes from 10 to 2300
- Version for corrosive environments, steel shaft, housing and cover with epoxy coating
- Single-acting or double-acting: optimised spring cartridge design for single acting operation in increments of 0.5 bar
Completely automated process valves from a single source supplier:
When combined with a sensor box, a pilot valve or positioner, the quarter turn actuator DFPD forms part of a complete automated process valve assembly.
www.festo.com/dfpd
To contact Festo about Festo Quarter-Turn Actuator DFPD use Get a quote.
Highlights
- NAMUR interface to VDI/VDE 3845
- Mounting plate for pilot valves in G and NPT thread versions
- End position adjustable at both ends
- Suitable for extreme temperatures: -50 … +150 °C
- Sizes from 10 to 2300
- Version for corrosive environments, steel shaft, housing and cover with epoxy coating
- Single-acting or double-acting: optimised spring cartridge design for single acting operation in increments of 0.5 bar
Completely automated process valves from a single source supplier:
When combined with a sensor box, a pilot valve or positioner, the quarter turn actuator DFPD forms part of a complete automated process valve assembly.
www.festo.com/dfpd
To contact Festo about Festo Quarter-Turn Actuator DFPD use Get a quote.
The Festo DFPD is a modular quarter-turn actuator designed to automate valves and air dampers. Its operating temperature range, from -50 to +150 °C, covers both hot and cold process conditions. Operators in corrosive process environments can choose the version with a steel shaft, housing and cover of the actuator, all finished with an epoxy coating.
- NAMUR interface to VDI/VDE 3845
- Available in multiple actuator sizes
- Single-acting spring cartridge uses 0.5 bar increments; double-acting version also available
- Pilot-valve mounting plate in G or NPT thread versions
- End position adjustable at both ends
Source: listing by Festo on IndustrySearch · Updated 1 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Festo on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Type 3003 Rotary Quarter Turn Actuators
Motorised Linear & Quarter Turn Actuators
Motorized Quarter Turn Actuators 9428 Series
Pneumatic Quarter Turn Actuators ASR Series
Pneumatic Quarter Turn Actuators SC Series
AMTROBOX Actuators
AMTRONIC Actuators
MN Manual Quarter Turn Actuator
MR Manual Quarter Turn Actuator
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales