Gunnebo Safety Barrier | EX750 CAT2 Boom ...

Gunnebo - Safety Barrier | EX750 CAT2 Boom Gate

Supplier: Gunnebo Australia

Safety Barrier | EX750 CAT2 Boom Gate

EX750 Rising Arm Barriers are an ATEX / IECEx certified product that have been designed for vehicle control in hazardous areas which are potentially susceptible to explosive atmospheres.

11 Recent Views In Stock

Features of this product

ATEX / IECEx certified
Certified for use up to Zone 1&2
Category 2G
Gas Group IIB
Robust Construction
Independently certified
Produced by certified IECEx manufacturer
100% Duty cycling
Low maintenance

Specifications of this product

Physical Dimensions: Barrier Cabinet – 1130mm H x 500mm W x 305mm D
Basic Power Requirements: 230v, 1ph, 6amp, 50HZ (Other voltages are available on request)
Control Voltage: S.E.L.V 24v
ATEX certified protection level: II 2G IIB c T3
IECEx certified protection level: Ex h IIB T3 Gb
Speed of operation: 4.2 seconds to raise/lower cycle
Approx weight: 130kg
Paint finish: INVER S.P.A. 40496 NP ESD Rosso 3001 (red), thickness 80 microns (anti-static paint)
Boom profile – Rectangular extruded aluminium 76 x 38mm white powder coated with red fascal striping (black and yellow option available) Max length 5m. Booms are mounted on the right hand (as standard unless specified)
Barrier arm: The barrier arm is constructed from 76 x 38mm aluminium, white powder coated with reflective red striping. Booms are mounted on the right side of the barrier as viewed from the back of the cabinet.
Power fail operation: Manual hand wind
IP & Electrical protection level: The barrier comes with an IP66, ATEX / IECEx Ex d explosion proof certified enclosure to enclose the control system

To contact Gunnebo Australia about Gunnebo Safety Barrier | EX750 CAT2 Boom Gate use Get a quote.

Features of this product

ATEX / IECEx certified
Certified for use up to Zone 1&2
Category 2G
Gas Group IIB
Robust Construction
Independently certified
Produced by certified IECEx manufacturer
100% Duty cycling
Low maintenance

Specifications of this product

Physical Dimensions: Barrier Cabinet – 1130mm H x 500mm W x 305mm D
Basic Power Requirements: 230v, 1ph, 6amp, 50HZ (Other voltages are available on request)
Control Voltage: S.E.L.V 24v
ATEX certified protection level: II 2G IIB c T3
IECEx certified protection level: Ex h IIB T3 Gb
Speed of operation: 4.2 seconds to raise/lower cycle
Approx weight: 130kg
Paint finish: INVER S.P.A. 40496 NP ESD Rosso 3001 (red), thickness 80 microns (anti-static paint)
Boom profile – Rectangular extruded aluminium 76 x 38mm white powder coated with red fascal striping (black and yellow option available) Max length 5m. Booms are mounted on the right hand (as standard unless specified)
Barrier arm: The barrier arm is constructed from 76 x 38mm aluminium, white powder coated with reflective red striping. Booms are mounted on the right side of the barrier as viewed from the back of the cabinet.
Power fail operation: Manual hand wind
IP & Electrical protection level: The barrier comes with an IP66, ATEX / IECEx Ex d explosion proof certified enclosure to enclose the control system

Read less...

To contact Gunnebo Australia about Gunnebo Safety Barrier | EX750 CAT2 Boom Gate use Get a quote.

AI Overview BETA

The Gunnebo EX750 CAT2 rising-arm barrier controls vehicle access in hazardous areas where explosive atmospheres may occur, using a rectangular aluminium arm. ATEX and IECEx certification covers use up to Zone 1 and 2, allowing deployment in these locations. Sites needing power-fail operation can raise or lower the barrier arm by manual hand winding when electrical power is unavailable.