Hakko Solder Fume Extraction System 240V ...

Hakko - Solder Fume Extraction System 240V | FA430-15

Supplier: Oritech

Solder Fume Extraction System 240V | FA430-15

The Hakko FA-430-16 is a volume fume extractor unit with pre-HEPA, and maximum 2 ports/2 stations, no arms, 120W.

In Stock

Product Features:

Designed for use at soldering stations where it extracts contaminated air directly from the source and transfers it to the unit by flexible or rigid ducts
Powerful suction, quiet operation
Three airflow adjustment modes: High, medium, low
Two filters inside the unit remove contaminants from the air, then return the purified air to the area where the FA-430-16 is located
Pre-filter made from treated polyester material that removes coarse particles like dust and subsequently extends the life of the main HEPA filter
HEPA filter made from fiberglass paper medium and provides the greatest amount of surface area within the volume of the filter case
Standard filters contain an activated carbon element with absorption ratings of 80-85% and are also designed to extend the life of the main HEPA filter
Filter efficiencies are greater than 98% at 0.3 microns
Special filter replacement notification function detects the fan speed and notifies the operator of the appropriate time to replace the filters via indicator lights on the front panel
Power consumption: 120W
Maximum air flow:
- One port: 145 CFM (4.1 cu.m./min.)
- Two ports: 167 CFM (4.7 cu.m./min.)
Noise level: 44-53 dB @1m
Dimensions: 13.0" W x 14.4" H x 13.5" D (330 x 366 x 343 mm)
Weight (with filters): Approximately 16.5 lbs. (7.5 kgs)
NOTE: Not for use with flammable vapors
UNIT Requires C1571 / C1572 Duct Kit as additional options

To contact Oritech about Hakko Solder Fume Extraction System 240V | FA430-15 use Get a quote.

Product Features:

Designed for use at soldering stations where it extracts contaminated air directly from the source and transfers it to the unit by flexible or rigid ducts
Powerful suction, quiet operation
Three airflow adjustment modes: High, medium, low
Two filters inside the unit remove contaminants from the air, then return the purified air to the area where the FA-430-16 is located
Pre-filter made from treated polyester material that removes coarse particles like dust and subsequently extends the life of the main HEPA filter
HEPA filter made from fiberglass paper medium and provides the greatest amount of surface area within the volume of the filter case
Standard filters contain an activated carbon element with absorption ratings of 80-85% and are also designed to extend the life of the main HEPA filter
Filter efficiencies are greater than 98% at 0.3 microns
Special filter replacement notification function detects the fan speed and notifies the operator of the appropriate time to replace the filters via indicator lights on the front panel
Power consumption: 120W
Maximum air flow:
- One port: 145 CFM (4.1 cu.m./min.)
- Two ports: 167 CFM (4.7 cu.m./min.)
Noise level: 44-53 dB @1m
Dimensions: 13.0" W x 14.4" H x 13.5" D (330 x 366 x 343 mm)
Weight (with filters): Approximately 16.5 lbs. (7.5 kgs)
NOTE: Not for use with flammable vapors
UNIT Requires C1571 / C1572 Duct Kit as additional options

Read less...

To contact Oritech about Hakko Solder Fume Extraction System 240V | FA430-15 use Get a quote.

AI Overview BETA

The Hakko fume extractor draws contaminated air from its source through flexible or rigid ducts, filters it, and returns the purified air to the area around the unit. A filter-replacement alert tracks fan speed and uses front-panel lights to signal when filters need changing. Soldering stations needing extraction at multiple points can use its multi-port arrangement.