Hakko Vacuum Desoldering Station | FR400

Hakko - Vacuum Desoldering Station | FR400

Supplier: Oritech

Vacuum Desoldering Station | FR400

Heavy-duty Desoldering Tool with built-in vacuum pump

In Stock

Product Features:

Heavy-duty Desoldering Tool with built-in vacuum pump
Quick and secure desoldering even on high heat capacity and high heat dissipation PWB with super power
Secure desoldering with valve function
Solder clogging was reduced featuring Anti Clogging Function
300 W tremendous power enables nearly impossible desoldering on PWB with high heat capacity and high heat dissipation property
300 W tremendous power makes incredible heating
Secure desoldering, valve function that suctions with high pressure
- Suction starts 0.2 seconds after pulling the trigger for instance and high pressure suction to achieve complete desoldering
Reduction of solder clogging
- Improvement in heating core
- Heating ability for backside of heating core is increased to ensure suctioned solder be carried to filter pipe and avoid solder clogging
- Featuring ACF (Anti Clogging Function)
- ACF ensures suctioned solder be carried to filter pipe by keeping pump running for a second after releasing trigger
Improvement in maintainability
- Featuring new filter pipe 3 times larger than the previous model
- The new filter pipe is 3 times larger than the previous model and applicable to operation on large components. This is not disposal type and for repeatable use
- Easy heater replacement
- Easy heater replacement by removing 3 screws on the part of heating core
- Tool box for maintenance kit
- A tool box that contains of maintenance tools such as cleaning pins for nozzle and heating core is provided for standard. The box can be set on the top of the unit for the convenience of use
- Larger filer and more transparency
- When desoldering, flux is also suctioned. Flux can cause degradation of suction performance if it enters inside the pump. To avoid the degradation, filter is attached on the front panel. The new filter is larger than the previous type to enhance greater adsorption property. Also the transparent filter cover makes it easy to check filter condition
Featuring a large LCD display
- Very easy to see temperature on the large LCD display
- Vacuum indicator to check clogging
Lineup of nozzles for large components
- Nozzles applicable to shapes like 2 mm or larger diameter lead or flat termination are lined up
The Hakko FR400 Vacuum Desoldering Station is compatible with the N60 series soldering tips

To contact Oritech about Hakko Vacuum Desoldering Station | FR400 use Get a quote.

Product Features:

Heavy-duty Desoldering Tool with built-in vacuum pump
Quick and secure desoldering even on high heat capacity and high heat dissipation PWB with super power
Secure desoldering with valve function
Solder clogging was reduced featuring Anti Clogging Function
300 W tremendous power enables nearly impossible desoldering on PWB with high heat capacity and high heat dissipation property
300 W tremendous power makes incredible heating
Secure desoldering, valve function that suctions with high pressure
- Suction starts 0.2 seconds after pulling the trigger for instance and high pressure suction to achieve complete desoldering
Reduction of solder clogging
- Improvement in heating core
- Heating ability for backside of heating core is increased to ensure suctioned solder be carried to filter pipe and avoid solder clogging
- Featuring ACF (Anti Clogging Function)
- ACF ensures suctioned solder be carried to filter pipe by keeping pump running for a second after releasing trigger
Improvement in maintainability
- Featuring new filter pipe 3 times larger than the previous model
- The new filter pipe is 3 times larger than the previous model and applicable to operation on large components. This is not disposal type and for repeatable use
- Easy heater replacement
- Easy heater replacement by removing 3 screws on the part of heating core
- Tool box for maintenance kit
- A tool box that contains of maintenance tools such as cleaning pins for nozzle and heating core is provided for standard. The box can be set on the top of the unit for the convenience of use
- Larger filer and more transparency
- When desoldering, flux is also suctioned. Flux can cause degradation of suction performance if it enters inside the pump. To avoid the degradation, filter is attached on the front panel. The new filter is larger than the previous type to enhance greater adsorption property. Also the transparent filter cover makes it easy to check filter condition
Featuring a large LCD display
- Very easy to see temperature on the large LCD display
- Vacuum indicator to check clogging
Lineup of nozzles for large components
- Nozzles applicable to shapes like 2 mm or larger diameter lead or flat termination are lined up
The Hakko FR400 Vacuum Desoldering Station is compatible with the N60 series soldering tips

Read less...

To contact Oritech about Hakko Vacuum Desoldering Station | FR400 use Get a quote.

AI Overview BETA

Hakko FR400 is a vacuum desoldering station with a built-in pump for removing solder from circuit boards. Its Anti Clogging Function keeps the pump running for a second after trigger release, carrying suctioned solder to the filter pipe and helping reduce solder clogging. For work on large components, its reusable filter pipe is suited to repeated operation.

300 W power for desoldering high-heat-capacity, high-heat-dissipation PWBs
Valve function provides high-pressure suction
Suction starts 0.2 seconds after trigger pull
Filter pipe is three times larger than the previous model
Standard maintenance tool box includes cleaning pins for the nozzle and heating core

Source: listing by Oritech on IndustrySearch · Updated 2 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Oritech provide you with a quote