Nordson Selective Soldering Machine | ...

Nordson - Selective Soldering Machine | Select Integra 508-5S

Supplier: Oritech

Selective Soldering Machine | Select Integra 508-5S

The Integra™ 508.5 is a multi-station selective soldering system designed for high-volume applications with maximum throughput. Due to its modular design, the Integra™ 508.5 can be matched to the requirements of various high-volume applications.

In Stock

Available in four variants, the Integra™ 508.5 features concurrent fluxing, preheating and soldering and can be configured with two or three in-line soldering stations for maximum output.

Product Benefits:

Versatility: With its flexible configuration, the Integra™ 508.5 is a versatile selective soldering platform and can be equipped for either single, parallel or double processing. Use of a single dropjet fluxer and solder pot allows soldering of printed circuit boards as large as 508 x 508 mm (20.0 x 20.0 in.).
Integra 508.5 2S Configuration: When configured with dual drop-jet fluxers and dual solder pots, the Integra™ 508.5 can be used in two different modes and is capable of processing up to 10 boards at one time. The parallel processing mode enables fluxing and soldering of two printed circuit boards in each fluxing and soldering station at the same time doubling machine productivity.
Value: With a reputation for innovation, comprehensive process solutions from Nordson SELECT ensure a maximum return on investment and low cost of ownership. From initial process development through full-scale production, you are supported by our experienced worldwide engineering, applications development and technical service network.

Product Features:

Five-zone operation with independent zone for concurrent fluxing and preheating plus either two (508.5 2S) or three selective soldering stations (508.5 3S)
SMEMA chain conveyor with positive PCB location
Automatic conveyor width adjustment
MicroDrop drop-jet fluxer
Flux level sensing system
Full surface bottom-side infrared preheating
All titanium solder pot and pump assembly
Quick change magnetically coupled solder nozzle
Automatic solder pot level monitoring
Automatic wave height monitoring
Heated nitrogen inerting system
Process viewing camera
PhotoScan editor and machine control software
Easy “point-and-click” programming
Remote machine control
Remote machine maintenance
Network and FIS capability
TFT monitor

Optional Features:

In-process, closed-loop flux verification system for drop-jet control
Full surface topside infrared preheating
Closed-loop pyrometer control
Board warpage sensing system
Dual process viewing camera and second monitor
Automatic solder wire feeding system
Automatic solder level sensing system
Wave height control sensing system
Automatic solder nozzle cleaning system
AOI solder joint inspection system
Data logging system with traceability of all process parameters
Barcode reader

To contact Oritech about Nordson Selective Soldering Machine | Select Integra 508-5S use Get a quote.

Available in four variants, the Integra™ 508.5 features concurrent fluxing, preheating and soldering and can be configured with two or three in-line soldering stations for maximum output.

Product Benefits:

Versatility: With its flexible configuration, the Integra™ 508.5 is a versatile selective soldering platform and can be equipped for either single, parallel or double processing. Use of a single dropjet fluxer and solder pot allows soldering of printed circuit boards as large as 508 x 508 mm (20.0 x 20.0 in.).
Integra 508.5 2S Configuration: When configured with dual drop-jet fluxers and dual solder pots, the Integra™ 508.5 can be used in two different modes and is capable of processing up to 10 boards at one time. The parallel processing mode enables fluxing and soldering of two printed circuit boards in each fluxing and soldering station at the same time doubling machine productivity.
Value: With a reputation for innovation, comprehensive process solutions from Nordson SELECT ensure a maximum return on investment and low cost of ownership. From initial process development through full-scale production, you are supported by our experienced worldwide engineering, applications development and technical service network.

Product Features:

Five-zone operation with independent zone for concurrent fluxing and preheating plus either two (508.5 2S) or three selective soldering stations (508.5 3S)
SMEMA chain conveyor with positive PCB location
Automatic conveyor width adjustment
MicroDrop drop-jet fluxer
Flux level sensing system
Full surface bottom-side infrared preheating
All titanium solder pot and pump assembly
Quick change magnetically coupled solder nozzle
Automatic solder pot level monitoring
Automatic wave height monitoring
Heated nitrogen inerting system
Process viewing camera
PhotoScan editor and machine control software
Easy “point-and-click” programming
Remote machine control
Remote machine maintenance
Network and FIS capability
TFT monitor