Hydraulink Hydraulic Hose I Four/Six Spiral ...

Hydraulink - Hydraulic Hose I Four/Six Spiral Wire Hose HX6K-06

Supplier: Hydraulink Australia

Hydraulic Hose I Four/Six Spiral Wire Hose HX6K-06

The Four/Six Spiral Wire Hose is recommended for extremely high pressure and high impulse hydraulic applications.

32 Recent Views In Stock

Key Features

Extra flexible
1/2 SAE bend radius

Specifications of this product

Internal tube: Synthetic rubber.
Reinforcement: Four (six for -20, -24) alternating layers of spiraled, high tensile steel wires.
External cover: Weather & abrasion resistant synthetic rubber. MSHA approved.
Temperature range: -40°C to +121°C (125°C discontinuous)
Standards: Hydraulink proprietary. Exceeds SAE 100 R15.
Internal Size: 06
Internal Diameter - DN: 10
Internal Diameter - Inches: 3/8
External Diameter - mm: 20
Working Pressure - psi: 6100
Working pressure – bar: 420
Min burst pressure – psi: 24400
Min burst pressure – bar: 1680
Min bend radius – mm: 65

To contact Hydraulink Australia about Hydraulink Hydraulic Hose I Four/Six Spiral Wire Hose HX6K-06 use Get a quote.

Key Features

Extra flexible
1/2 SAE bend radius

Specifications of this product

Internal tube: Synthetic rubber.
Reinforcement: Four (six for -20, -24) alternating layers of spiraled, high tensile steel wires.
External cover: Weather & abrasion resistant synthetic rubber. MSHA approved.
Temperature range: -40°C to +121°C (125°C discontinuous)
Standards: Hydraulink proprietary. Exceeds SAE 100 R15.
Internal Size: 06
Internal Diameter - DN: 10
Internal Diameter - Inches: 3/8
External Diameter - mm: 20
Working Pressure - psi: 6100
Working pressure – bar: 420
Min burst pressure – psi: 24400
Min burst pressure – bar: 1680
Min bend radius – mm: 65

Read less...

To contact Hydraulink Australia about Hydraulink Hydraulic Hose I Four/Six Spiral Wire Hose HX6K-06 use Get a quote.

Hydraulink Hose Brochure(2.16MB)

AI Overview BETA

Hydraulink’s Four/Six HX6K-06 spiral wire hydraulic hose has a synthetic rubber tube and outer cover, carrying hydraulic fluid through pressurised hydraulic equipment and systems. Its 420 bar working pressure suits the extremely high-pressure hydraulic applications for which this hose is recommended. Hydraulic circuits with high impulse demands are also among the recommended applications for this hose.

Four alternating layers of spiralled, high-tensile steel wire reinforce the -06 size
Temperature range: -40°C to +121°C; 125°C discontinuous
65 mm minimum bend radius; 1/2 SAE bend radius
Minimum burst pressure: 1,680 bar
MSHA-approved cover; exceeds SAE 100 R15 under Hydraulink proprietary standards

Source: listing by Hydraulink Australia on IndustrySearch · Updated 3 Nov 2026
Supplier document: Hydraulink Hose Brochure (PDF)

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Hydraulink Australia provide you with a quote