Hydraulink Hydraulic Hose I Six Spiral ...

Hydraulink - Hydraulic Hose I Six Spiral Wire Hose H13-32

Supplier: Hydraulink Australia

Hydraulic Hose I Six Spiral Wire Hose H13-32

This Six Spiral Wire Reinforced Hose is recommended for extremely high pressure and high impulse hydraulic applications.

29 Recent Views In Stock

Specifications of this product

Internal tube: Synthetic rubber.
Reinforcement: Six alternating layers of spiraled, high tensile steel wires.
External cover: Weather & abrasion resistant synthetic rubber. MSHA approved.
Temperature range: -40°C to +121°C (125°C discontinuous)
Internal Size: 32
Internal Diameter - DN: 51
Internal Diameter - Inches: 2
External Diameter - mm: 71.1
Working Pressure - psi: 5100
Working pressure – bar: 350
Min burst pressure – psi: 20400
Min burst pressure – bar: 1400
Min bend radius – mm: 630

To contact Hydraulink Australia about Hydraulink Hydraulic Hose I Six Spiral Wire Hose H13-32 use Get a quote.

Specifications of this product

Internal tube: Synthetic rubber.
Reinforcement: Six alternating layers of spiraled, high tensile steel wires.
External cover: Weather & abrasion resistant synthetic rubber. MSHA approved.
Temperature range: -40°C to +121°C (125°C discontinuous)
Internal Size: 32
Internal Diameter - DN: 51
Internal Diameter - Inches: 2
External Diameter - mm: 71.1
Working Pressure - psi: 5100
Working pressure – bar: 350
Min burst pressure – psi: 20400
Min burst pressure – bar: 1400
Min bend radius – mm: 630

Read less...

To contact Hydraulink Australia about Hydraulink Hydraulic Hose I Six Spiral Wire Hose H13-32 use Get a quote.

AI Overview BETA

The Hydraulink H13-32 is a hydraulic hose recommended for use in hydraulic applications involving extremely high pressures and high impulse levels. The hose’s reinforcement consists of six alternating layers of spiralled, high-tensile steel wire. For hydraulic systems exposed to weather or abrasion, its external synthetic-rubber cover resists both conditions and is also approved by MSHA

Working pressure: 350 bar; minimum burst pressure: 1,400 bar
Temperature range: -40°C to +121°C; 125°C discontinuous
Minimum bend radius: 630 mm
Internal diameter: 2 inches (DN 51)
External diameter: 71.1 mm

Source: listing by Hydraulink Australia on IndustrySearch · Updated 1 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Hydraulink Australia provide you with a quote