The IBN Batch Controller is 85-265VAC or 12-40VDC powered batch controller for liquids that incorporates an eight (8) digit OLED (Organic light emitting diode) display with numeric input of data. The instrument can be configured from the front panel
Batch in local or remote mode up or down from set point
Simple touch switch programming with language statement prompts
Low cost - High performance
Low flow alarm with batch cancel
Programmable end of batch signal with end of batch pulse of 0.0 to 99.9 seconds
Pulse output per litre in batch up mode
Dip switch selection for turbine, reed switch, open collector, Namur & CMOS logic
Optional clear silicon boot for IP67 protection
Applications include water treatment, dosing, food ingredient batching and bottling
sensor supply adjustable from 8 to 20VDC
Plug in screw terminal electrical connections
Programmable K factor
85 to 265VAC 47-63 Hz universal supply or factory fitted 12 to 40VDC isolated supply
Why Choose This Product
The IBN Batch Controller is 85-265VAC or 12-40VDC powered batch controller for liquids that incorporates an eight (8) digit OLED (Organic light emitting diode) display with numeric input of data. The instrument can be configured from the front panel to batch volumes from 0.001 to 999,999.99 litres.
Specifications of this product
The instrument accepts an input from 0 to 2KHZ and is dip switch selectable for open collector, reed, Hall and turbine signals (from 20mV peak to peak).
The IBN incorporates an eight (8) digit 7mm digit height high contrast (OLED) display with a wide viewing angle and a viewing distance of 5 metres.
The instrument incorporates a background total stored in EEPROM during loss of power. This total can be displayed by the front total touch button.
Low flow alarm
An incorporated low flow alarm. If no input pulses are received in a programmed period a alarm is activated, the batch is cancelled and LF ERR is displayed.
0-70 degrees Celsius and 0-90% RH non-condensing.
Front facia is weatherproof to IP54.
Optional clear silicon boot to provide protection to IP67 – Option - WP
Terminal 1: Input 0VDC
Terminal 13: Input 0VDC
Terminal 2: Input minus (-)
Terminal 14: Not used
Terminal 3: Input plus (+)
Terminal 15: Pulse per litre open collector output
Terminal 4: Start
Terminal 16: Low flow alarm open collector output
Terminal 5: Stop
Terminal 17: End of batch open collector output
Terminal 6: Resume
Terminal 18: Not used
Terminal 7: Reset
Terminal 19: Relay 1 Normally open contact
Terminal 8: 8V to 20VDC sensor supply
Terminal 20: Relay 1 common contact
Terminal 9: Not used
Terminal 21: Relay 1 Normally closed contact
Terminal 10: Ground supply
Terminal 22: Relay 2 Normally open contact
Terminal 11: VAC or 24VDC active supply
Terminal 23: Relay 2 common contact
Terminal 12: VAC Neutral or 0VDC supply
Terminal 24: Relay 2 Normally closed contact
Power Supply Ground Supply
85 to 265VAC 47-63 Hz universal supply or isolator DC input from 12 to 40VDC.
A transducer power supply of 8 to 20VDC at 30mA is incorporated in the instrument.
Panel mounting plastic enclosure of 96 mm wide by 96 mm high by 118mm deep with a panel cut out of 92 mm wide by 92 mm high. When using the optional plastic boot for IP67 protection please allow a cut out of 93 x 93mm
The batch size is set from the front panel. The start button will energise output one and start liquid flow. Relay two energises when its time delay is finished. The batcher will increment / decrement until the batch is complete. Relay two can be programmed to start and stop anywhere in the batch cycle.
Model/input/display/power/options. Sample number IBN/CC/0-99999999/VAC/WP.
Innovec Controls | Process Instrumentation
Innovec Controls is Solutions That Work. We can offer products that will do what you want, when you want.
Whether it be counting bottles on a production line, flow measurement, a fuel gauge or a fuel ...