Valve Profile IBA | Batch Controllers

The instrument can be configured from the front touch buttons to batch volumes from 0.1 to 999,999 litres and K factors from 999,999 to 0.01 can be utilised. The instrument provides the excitation power supply for the flow sensor.

The IBL can operate in local manual mode by front panel touch switches for Batch Start, Stop & resume or in remote mode as these functions are available for external control.

Features

• Simple touch switch programming with language statement prompts
• Low cost - High performance
• LCD display of 6 characters with 18 mm digit height and white LED backlight
• Low flow alarm with batch cancel
• Programmable end of batch signal with an end of batch pulse of 0.0 to 99.9 seconds
• Background total
• Isolated 4-20mA control output of 16 bit with five point programmable profile for valve control
• Batch set from front panel in programme mode or in run
• Pulse output per litre
• Dip switch selectable input: turbine, reed switch, open collector, Namur & CMOS logic
• Applications include water treatment, dosing, food ingredient batching and bottling
• Isolated sensor supply that can be adjusted from 8 to 20VDC
• RS232 port for ticket printer control
• Plug in screw terminal electrical connections
• K factor 999,999 to .01 and set point 0.001 to 999,999
• 85 to 265VAC 47-63 Hz supply or factory fitted 12 to 40VDC isolated supply
• CE Conformity
• Optional clear silicon weatherproof boot to give front panel protection to IP67