The instrument can be configured from the front touch buttons to batch volumes from 0.001 to 999,999 litres, and K factors from 999,999 to 0.01 can be utilised. The instrument can batch in up or down mode and provide the excitation power supply for the flow sensor.
Batch in local or remote mode up or down from set point
Simple touch switch programming with English statement prompts
Low cost - High performance
LCD display of 6 characters with 18mm digit height and white LED backlight
Low flow alarm with batch cancel
Programmable end of batch signal with an end of batch pulse of 0.0 to 99.9 seconds
Programmable delay on relay two start and pre-stop
Batch set from front panel in programme mode or in run
Pulse output per litre
Automatic over run compensation in whole litres only
Sensor supply that can be adjusted from 8 to 20VDC
Plug-in screw terminal electrical connections
K factor 999,999 to .01 and set point 0.001 to 999,999
85 to 265VAC 47-63 Hz supply or factory fitted 12 to 40VDC isolated supply
The instrument accepts quadrature input with reverse flow detection or single pulse train input from 0 to 2KHZ and is dip switch selectable for open collector, reed, Hall, Namur and turbine signals (from 20mV peak to peak).
The IBL incorporates a six (6) digit 18mm digit height (LCD) display with integrated white LED backlight with a wide viewing angle and a viewing distance of 5 metres. The front panel switched are an embossed membrane type with positive action.
The instrument incorporates an optional RS232 serial port to drive a ticket printer with client header, batch total, accumulated total, current time, current date and batch number.
The instrument incorporates a background running total that is stored in eeprom memory during loss of power. This total can be displayed by the front total touch button and reset.
Low Flow Alarm
The instrument incorporates a low flow alarm. If no input pulses are received in a pre- programmed period the low flow output becomes active and the batch is cancelled and LF ERR is displayed.
0-70 degrees Celsius and 0-90% RH non-condensing.
Front facia is weatherproof to IP65.
85 to 265VAC 47-63 Hz or DC to DC converter isolator from 12 to 40VDC. An adjustable transducer power supply of 8 to 24VDC at 30mA is incorporated in the instrument.
Panel mounting extruded aluminium enclosure of 144 mm wide by 72 mm high by 130mm deep (including pluggable rear terminals) with a panel cut out of 139 mm wide by 67 mm high.
Explosion proof version available
CE for EMC compliance and electrical safety.
Sample number ITS/INC/0-99999.9/24VDC.
Innovec Controls | Process Instrumentation IndustrySearch Trusted Supplier
Innovec Controls is Solutions That Work. We can offer products that will do what you want, when you want.
Whether it be counting bottles on a production line, flow measurement, a fuel gauge or a fuel ...