Powered Process Indicator | DIR4WP Price Guide: $750 Get latest price

Powered Process Indicator | DIR4WP

20 Recent Views In Stock

The DIR4WP Powered Process Indicator is a 85 to 250 VAC or 12-40 VDC powered microprocessor based indicator that incorporates a four (4) digit 57mm digit height LED display in a weatherproof surface mount enclosure with four set points that can switch 240VAC at one ampere resistive. The instrument is touch witch programmable from the front panel for input range, relay operation and display intensity.

Features:

• Accepts all standard process signals
• Digital instrument with touch switch programming of all functions - input range, relay on and off point, high or low alarm, and decimal point position
• Non-volatile storage of variables
• Differential input
• Low cost - High performance
• 85 to 250VAC 47-63 Hz supply or factory fitted 12 to 40vdc supply
• 4 digit high brightness LED display of 57mm digit height
• Decimal point programming
• Four (4) set point relays with form C contacts
• IP65 surface mount enclosure of 140mm high x 230mm wide x 95mm deep
• 24VDC loop supply for loop powered sensors and transmitters.

Specifications:

• Input Details
  • The instrument has a bipolar differential input. To realise the accuracy a temperature compensated band gap reference is used in the radiometric measurement system. Full scale ranges of 20 MV to 200VDC 200uA to 2 Amps and 4-20mA are acceptable.
• Displays
  • DIR4WP: A 4 digit high contrast light emitting diode (LED) of 57mm digit height with a wide viewing angle and a reading rate of 4 per second. The display intensity is programmable from the front panel. The digits have a viewing distance of 25 metres.
• Decimal Points
  • DIR4WP: Four (4) position user programmable from the front panel.
• Relay Outputs
  • DIR4WP: Four (4) switch point relays are provided with form C contacts rated at 240VAC one (5) ampere resistive.
• Instrument Power Supply
  • 85 to 250VAC 47-63 Hz or factory fitted DC to DC converter isolator from 12 to 40VDC.
• Transducer Power Supply
  • A 24VDC at 30mA transducer power supply is incorporated in the instrument.
• Environmental Parameters
  • 0-70 degrees Celsius
  • 0-90% rh NON condensing
• Weight
  • DIR4WP: 1500 grams
• Mounting Details
  • DIR4WP: Surface mounting plastic enclosure of case dimensions 230mm wide by 140mm high by 95mm deep with fixing centres of 212mm wide by 122mm high.
• Ordering Information
  • The part number is configured as
  • Model/input signal/display units/power supply
  • Sample number: DIR4WP/4-20mA/0-100.0/VAC
  • All units shipped factory calibrated to 0-100.0

 

Read more...

To contact Innovec Controls about Powered Process Indicator | DIR4WP use Get a quote.

The DIR4WP Powered Process Indicator is a 85 to 250 VAC or 12-40 VDC powered microprocessor based indicator that incorporates a four (4) digit 57mm digit height LED display in a weatherproof surface mount enclosure with four set points that can switch 240VAC at one ampere resistive. The instrument is touch witch programmable from the front panel for input range, relay operation and display intensity.

Features:

• Accepts all standard process signals
• Digital instrument with touch switch programming of all functions - input range, relay on and off point, high or low alarm, and decimal point position
• Non-volatile storage of variables
• Differential input
• Low cost - High performance
• 85 to 250VAC 47-63 Hz supply or factory fitted 12 to 40vdc supply
• 4 digit high brightness LED display of 57mm digit height
• Decimal point programming
• Four (4) set point relays with form C contacts
• IP65 surface mount enclosure of 140mm high x 230mm wide x 95mm deep
• 24VDC loop supply for loop powered sensors and transmitters.

Specifications:

• Input Details
  • The instrument has a bipolar differential input. To realise the accuracy a temperature compensated band gap reference is used in the radiometric measurement system. Full scale ranges of 20 MV to 200VDC 200uA to 2 Amps and 4-20mA are acceptable.
• Displays
  • DIR4WP: A 4 digit high contrast light emitting diode (LED) of 57mm digit height with a wide viewing angle and a reading rate of 4 per second. The display intensity is programmable from the front panel. The digits have a viewing distance of 25 metres.
• Decimal Points
  • DIR4WP: Four (4) position user programmable from the front panel.
• Relay Outputs
  • DIR4WP: Four (4) switch point relays are provided with form C contacts rated at 240VAC one (5) ampere resistive.
• Instrument Power Supply
  • 85 to 250VAC 47-63 Hz or factory fitted DC to DC converter isolator from 12 to 40VDC.
• Transducer Power Supply
  • A 24VDC at 30mA transducer power supply is incorporated in the instrument.
• Environmental Parameters
  • 0-70 degrees Celsius
  • 0-90% rh NON condensing
• Weight
  • DIR4WP: 1500 grams
• Mounting Details
  • DIR4WP: Surface mounting plastic enclosure of case dimensions 230mm wide by 140mm high by 95mm deep with fixing centres of 212mm wide by 122mm high.
• Ordering Information
  • The part number is configured as
  • Model/input signal/display units/power supply
  • Sample number: DIR4WP/4-20mA/0-100.0/VAC
  • All units shipped factory calibrated to 0-100.0

 

Read less...

To contact Innovec Controls about Powered Process Indicator | DIR4WP use Get a quote.