The 14.2mm high LED display with 2 alarm set points can switch 240VAC at 1 amp with 99% dead band. The instrument is rangeable in engineering units for millivolt, milliamp and voltage inputs. Range cards are available for PT100 resistance bulbs. An optional 24VDC at 30mA loop supply is available for the direct connection of 2 wire transmitters.
Accepts all standard process signals
The DIR35 is user rangeable in engineering units
Band gap reference
Low cost - High performance
120 or 240VAC 47-63 Hz supply or factory fitted 12 to 40vdc isolated supply
3.5 digit high brightness LED display of 14mm digit height
Decimal point selection
Two (2) set point relays with form C contacts
Housed in a panel mount enclosure of 48x96mm
24VDC loop supply for loop powered sensors and transmitters
Emc compliant (C tick)
The DIR35 Powered Process Indicators is an advanced instrument that has been designed and manufactured to stringent specifications which accept all the standard analogue process signals.
The DIR35 provides two (2) set point relays with 99% dead band. All the set point relays have changeover contacts and will switch one amp at 240VAC resistive. Screw terminal electrical connection by two part plug connectors allows simple connection and disconnection.
Innovec Controls | Process Instrumentation
Innovec Controls is Solutions That Work. We can offer products that will do what you want, when you want.
Whether it be counting bottles on a production line, flow measurement, a fuel gauge or a fuel ...