It has a 100mm high linear bar of light and a 4 digit numeric display which accepts inputs of volts and milliamps. An optional 24VDC loop supply is available for the direct connection of 2 wire transmitters
Accepts all standard process signals
Low cost - High Performance
85 to265VAC 47-63 Hz supply or factory fitted 10 to 40VDC isolated supply
High contrast 101 element LED display with a height of 128mm
Numeric four digit display of 10mm digit height
24VDC loop supply
Panel mount enclosure with a front facia of 55mm wide x 152mm high
Optional IP67 weatherproof instrument front by the use of a clear silicon boot
Applications include the display of flow, level and pressure
Australian design and manufacture
The BGI100 Powered Process Indicator is an advanced instrument which has been designed to accept all the standard process signals. This instrument incorporates a CMOS dual slope integrating analogue to digital converter which is deigned to reject electrical interference that normally abounds in industrial environments. The front panel of the BGI100 is sealed to IP56 and the instrument includes screw terminal electrical connections.
The instrument has a bipolar differential input. Full scale ranges of 200mV, 2V, 5V, 0-10V, 2mA, 20mA, 200mA and 4-20mA are acceptable
CMRR greater than 86db and NMRR greater than 100db
A 101 element high contrast light emitting diode (LED) bar of light of 128mm high with a wide viewing angle and a viewing distance of 5 metres and a 4 digit numeric display of 10mm digit height.
1 to 101 counts adjustable for the bar of light and 0-9999 for the 4 digit numeric display. For field adjustments the zero and span potentiometers are accessible from the rear of the instrument.
Accuracy +/- 1 element
0-70 degrees Celsius
0-90% rh Non-condensing
24VDC power supply at 30mA for powering 2 wire transmitters.
Terminal 1: Input common (-) for mA & Volts
Terminal 8: not used
Terminal 2: Input mA (+)
Terminal 9: not used
Terminal 3: Input Volts (+)
Terminal 10: not used
Terminal 4: 24VDC Loop supply
Terminal 11: not used
Terminal 5: not used
Terminal 12: 85 to265VAC or 24VDC active supply
Terminal 6: not used
Terminal 13: VAC neutral or 0Vdc supply
Terminal 7: not used
Terminal 14: Ground supply
Instrument Power Supply
85 to265VAC 47-63 Hz or factory fitted DC converter isolator from 12 to 40VDC.
Transducer Power Supply
An optional 24VDC at 30mA loop power supply is incorporated in the instrument.
Panel mounting with a panel cut out of 43mm wide by 138mm high.
Model/input/display units/power supply/options
All units shipped factory calibrated to 0-100.0
Innovec Controls | Process Instrumentation
Innovec Controls is Solutions That Work. We can offer products that will do what you want, when you want.
Whether it be counting bottles on a production line, flow measurement, a fuel gauge or a fuel ...