NFPZ 3000 Bag Dust Collector for sale from Nationwide Fabrications

NFPZ 3000 Bag Dust Collector

NFPZ 3000 Bag Dust Collector with Container

In Stock

The NFPZ3000 bag dust collector is designed for small and medium-sized woodwork shops producing limited volumes of material. It is a modular dust collector made of galvanised steel sheet with a telescopic support, suitable for outdoor use.Available in two different widths, type E 1200 mm (47″) and type J 2400 mm(94″). Each module of the filter design is fitted with a combined inspection and explosion relief door. Filter cleaning with regeneration fans. The filter is fitted with the unique patented SUPERBAG. The material removed is separated in the filter hopper and collected in metal containers. The filter can be supplied either for continuous operation or with a break to clean the filter bags every four hours.

Compact design
Suitable for handling large volumes of air with limited material contamination
Designed for continuous operation or operation with 15 minute breaks for cleaning, approx. every four hours
For mounting on the ground
Overpressure or vacuum versions up to 5 000 Pa
Explosion relief upwards or sideways
Powerful online cleaning with efficient regeneration fans
Patented antistatic polyester SUPERBAGs
Easy to install on site and extend when required
Low energy consumption

Download attached brochure

To contact Nationwide Fabrications about NFPZ 3000 Bag Dust Collector use Get a quote.

Compact design
Suitable for handling large volumes of air with limited material contamination
Designed for continuous operation or operation with 15 minute breaks for cleaning, approx. every four hours
For mounting on the ground
Overpressure or vacuum versions up to 5 000 Pa
Explosion relief upwards or sideways
Powerful online cleaning with efficient regeneration fans
Patented antistatic polyester SUPERBAGs
Easy to install on site and extend when required
Low energy consumption

Download attached brochure

Read less...

To contact Nationwide Fabrications about NFPZ 3000 Bag Dust Collector use Get a quote.

Brochure(2.36MB)

AI Overview BETA

The NFPZ 3000 Bag Dust Collector filters airborne dust, separating collected particles in a hopper before directing them into metal containers. Regeneration fans clean its filter bags, supporting continuous operation or scheduled pauses for cleaning approximately every four hours. Small and medium-sized woodwork shops producing limited volumes are its intended users, and its modular design allows later extension.

Patented antistatic polyester SUPERBAG filters
Filter-cleaning breaks last 15 minutes
Type E width: 1,200 mm; type J width: 2,400 mm
Overpressure or vacuum versions up to 5,000 Pa
Inspection and explosion-relief door on each module; relief can face upwards or sideways

Source: listing by Nationwide Fabrications on IndustrySearch · Updated 31 Oct 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Nationwide Fabrications provide you with a quote